|
Physical Properties | Original Value | Comments |
---|
Density | 1.06 - 1.97 g/cc |
| 1.29 - 1.36 g/cc @Temperature 223 - 250 °C |
Filler Content | 25.0 - 30.0 % |
Water Absorption | 0.0300 - 0.500 % |
Moisture Absorption at Equilibrium | 0.0200 - 0.400 % |
Water Absorption at Saturation | 0.0600 - 0.700 % |
Additive Loading | 30.0 % |
Viscosity | 110000 - 210000 cP |
| 16.0 - 18.0 cP @Temperature 250 - 265 °C |
| 16.0 - 18.0 cP @Load 5.00 - 5.00 kg |
| 12.0 - 230000 cP @Shear Rate 10.0 - 100000 1/s |
| 12.0 - 230000 cP @Temperature 230 - 280 °C |
Viscosity Test | 68.0 - 108 cm³/g |
Viscosity Number | 87.0 - 114 cm³/g |
Maximum Moisture Content | 0.0200 - 0.0400 |
Linear Mold Shrinkage | 0.000 - 0.0600 cm/cm |
| 0.00300 - 0.00300 cm/cm @Temperature 80.0 - 80.0 °C |
| 0.00300 - 0.00350 cm/cm @Temperature 260 - 260 °C |
| 0.00300 - 0.00350 cm/cm @Pressure 60.0 - 60.0 MPa |
Linear Mold Shrinkage, Transverse | 0.00100 - 0.0210 cm/cm |
| 0.0110 - 0.0110 cm/cm @Temperature 80.0 - 80.0 °C |
| 0.00700 - 0.0110 cm/cm @Temperature 260 - 260 °C |
| 0.00700 - 0.0110 cm/cm @Pressure 60.0 - 60.0 MPa |
Melt Flow | 1.00 - 63.0 g/10 min |
Spiral Flow | 28.0 - 35.0 cm |
Ash | 28.0 - 34.0 % |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell M | 55.0 - 112 |
Hardness, Rockwell R | 90.0 - 124 |
Hardness, Shore D | 79.0 - 85.0 |
Ball Indentation Hardness | 105 - 230 MPa |
Tensile Strength, Ultimate | 44.0 - 186 MPa |
| 15.0 - 195 MPa @Temperature -40.0 - 150 °C |
Tensile Strength, Yield | 82.7 - 155 MPa |
Elongation at Break | 1.00 - 130 % |
| 1.90 - 6.30 % @Temperature 0.000 - 150 °C |
Elongation at Yield | 2.00 - 5.00 % |
Modulus of Elasticity | 4.00 - 15.0 GPa |
| 1.80 - 11.0316 GPa @Temperature -40.0 - 150 °C |
Flexural Yield Strength | 80.0 - 270 MPa |
| 115 - 120 MPa @Temperature 90.0 - 90.0 °C |
Flexural Modulus | 3.83 - 19.3 GPa |
| 4.80 - 5.50 GPa @Temperature 90.0 - 90.0 °C |
Flexural Strain at Break | 2.00 - 3.50 % |
Flexural Strain at Yield | 3.20 - 3.80 % |
Compressive Yield Strength | 117 - 124 MPa |
Poissons Ratio | 0.330 - 0.340 |
Izod Impact | 70.0 - 72.0 J |
| 65.0 - 72.0 J @Temperature -30.0 - 0.000 °C |
Izod Impact, Notched | 0.150 - 2.19 J/cm |
| 0.96102 - 0.96102 J/cm @Temperature -28.9 - -28.9 °C |
Izod Impact, Unnotched | 1.08 - 11.8 J/cm |
| 5.00 - 5.25 J/cm @Temperature -30.0 - -30.0 °C |
Izod Impact, Notched (ISO) | 4.00 - 70.0 kJ/m² |
| 6.00 - 32.0 kJ/m² @Temperature -40.0 - 30.0 °C |
Izod Impact, Unnotched (ISO) | 35.0 - 70.0 kJ/m² |
| 30.0 - 60.0 kJ/m² @Temperature -40.0 - -30.0 °C |
Charpy Impact Unnotched | 0.850 - 50.0 J/cm² |
| 0.700 - 8.00 J/cm² @Temperature -40.0 - -20.0 °C |
Charpy Impact, Notched | 0.210 - 7.50 J/cm² |
| 0.300 - 1.60 J/cm² @Temperature -40.0 - -20.0 °C |
Dart Drop, Total Energy | 5.00 - 6.00 J |
Puncture Energy | 1.90 - 2.30 J |
| 1.70 - 2.50 J @Temperature -30.0 - -30.0 °C |
Coefficient of Friction | 0.150 - 0.240 |
Tensile Creep Modulus, 1 hour | 3600 - 11000 MPa |
Tensile Creep Modulus, 1000 hours | 2500 - 10000 MPa |
|
Electrical Properties | Original Value | Comments |
---|
Electrical Resistivity | 1.00e+8 - 2.00e+17 ohm-cm |
Surface Resistance | 3.00 - 2.00e+17 ohm |
Dielectric Constant | 2.50 - 5.10 |
Dielectric Strength | 14.0 - 100 kV/mm |
Dissipation Factor | 0.000750 - 0.140 |
Dielectric Loss Index | 0.00200 - 0.0200 |
Arc Resistance | 60.0 - 200 sec |
Comparative Tracking Index | 2.00 - 600 V |
Hot Wire Ignition, HWI | 7.00 - 120 sec |
High Amp Arc Ignition, HAI | 30.0 - 120 arcs |
High Voltage Arc-Tracking Rate, HVTR | 0.000 - 150 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear | 10.0 - 120 µm/m-°C |
| 10.0 - 30.0 µm/m-°C @Temperature 50.0 - 160 °C |
CTE, linear, Transverse to Flow | 1.13 - 190 µm/m-°C |
| 110 - 160 µm/m-°C @Temperature 50.0 - 160 °C |
Specific Heat Capacity | 1.40 - 1.73 J/g-°C |
| 1.73 - 1.73 J/g-°C @Temperature 223 - 250 °C |
Thermal Conductivity | 0.166 - 0.370 W/m-K |
| 0.280 - 0.280 W/m-K @Temperature 223 - 250 °C |
Melting Point | 200 - 260 °C |
Maximum Service Temperature, Air | 75.0 - 350 °C |
Hot Ball Pressure Test | 125 - 220 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 160 - 234 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 70.0 - 224 °C |
Deflection Temperature at 8.0 MPa | 70.0 - 165 °C |
Vicat Softening Point | 150 - 225 °C |
Glass Transition Temp, Tg | 19.0 - 65.0 °C |
Decomposition Temperature | 290 - 300 °C |
UL RTI, Electrical | 60.0 - 140 °C |
UL RTI, Mechanical with Impact | 60.0 - 150 °C |
UL RTI, Mechanical without Impact | 60.0 - 140 °C |
Flammability, UL94 | HB - 5VA |
Flame Spread | 0.000 - 100 mm/min |
Oxygen Index | 19.0 - 43.0 % |
Glow Wire Test | 650 - 960 °C |
Ignition Temperature | 350 - 400 °C |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 20.0 - 280 °C |
Nozzle Temperature | 225 - 280 °C |
Die Temperature | 240 - 275 °C |
Melt Temperature | 206 - 338 °C |
Mold Temperature | 26.7 - 150 °C |
Injection Velocity | 200 - 300 mm/sec |
Drying Temperature | 60.0 - 140 °C |
Moisture Content | 0.000 - 0.200 % |
Dew Point | -40.0 - -28.9 °C |
Injection Pressure | 3.45 - 124 MPa |
Vent Depth | 0.00127 - 0.00381 cm |
Hot-Working Temperature | 250 - 260 °C |
Precipitation Temperature | 40.0 - 60.0 °C |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.