|
Physical Properties | Metric | English | Comments |
---|
Density | 1.39 - 1.76 g/cc | 0.0502 - 0.0636 lb/in³ |
| 1.10 - 1.45 g/cc @Temperature 285 - 325 °C | 0.0397 - 0.0524 lb/in³ @Temperature 545 - 617 °F |
Filler Content | 35.0 - 43.0 % | 35.0 - 43.0 % |
Water Absorption | 0.00700 - 6.00 % | 0.00700 - 6.00 % |
Moisture Absorption at Equilibrium | 0.800 - 2.00 % | 0.800 - 2.00 % |
| 1.70 - 1.70 % @Temperature 70.0 - 70.0 °C | 1.70 - 1.70 % @Temperature 158 - 158 °F |
Water Absorption at Saturation | 3.50 - 6.00 % | 3.50 - 6.00 % |
Maximum Moisture Content | 0.100 - 0.150 | 0.100 - 0.150 |
Linear Mold Shrinkage | 0.00100 - 0.0310 cm/cm | 0.00100 - 0.0310 in/in |
| 0.00100 - 0.00100 cm/cm @Temperature 80.0 - 80.0 °C | 0.00100 - 0.00100 in/in @Temperature 176 - 176 °F |
Linear Mold Shrinkage, Transverse | 0.00100 - 0.0850 cm/cm | 0.00100 - 0.0850 in/in |
| 0.00400 - 0.00600 cm/cm @Temperature 80.0 - 80.0 °C | 0.00400 - 0.00600 in/in @Temperature 176 - 176 °F |
|
Mechanical Properties | Metric | English | Comments |
---|
Ball Indentation Hardness | 100 - 325 MPa | 14500 - 47100 psi |
Tensile Strength, Ultimate | 50.0 - 270 MPa | 7250 - 39200 psi |
| 140 - 150 MPa @Temperature 80.0 - 80.0 °C | 20300 - 21800 psi @Temperature 176 - 176 °F |
Tensile Strength, Yield | 150 - 240 MPa | 21800 - 34800 psi |
Elongation at Break | 1.30 - 16.0 % | 1.30 - 16.0 % |
| 2.40 - 2.80 % @Temperature 80.0 - 80.0 °C | 2.40 - 2.80 % @Temperature 176 - 176 °F |
Elongation at Yield | 3.00 - 6.00 % | 3.00 - 6.00 % |
Modulus of Elasticity | 3.00 - 20.0 GPa | 435 - 2900 ksi |
| 8.05 - 10.0 GPa @Temperature 80.0 - 80.0 °C | 1170 - 1450 ksi @Temperature 176 - 176 °F |
Flexural Yield Strength | 45.0 - 380 MPa | 6530 - 55100 psi |
| 210.29 - 260 MPa @Temperature 80.0 - 80.0 °C | 30500 - 37700 psi @Temperature 176 - 176 °F |
Flexural Modulus | 6.10 - 15.5 GPa | 885 - 2250 ksi |
| 7.17055 - 9.50 GPa @Temperature 80.0 - 80.0 °C | 1040.02 - 1380 ksi @Temperature 176 - 176 °F |
Flexural Strain at Break | 3.50 - 4.50 % @Temperature 80.0 - 80.0 °C | 3.50 - 4.50 % @Temperature 176 - 176 °F |
Poissons Ratio | 0.330 - 0.340 | 0.330 - 0.340 |
Izod Impact, Notched | 0.801 - 1.80 J/cm | 1.50 - 3.37 ft-lb/in |
Izod Impact, Notched (ISO) | 7.00 - 57.0 kJ/m² | 3.33 - 27.1 ft-lb/in² |
| 7.10 - 48.0 kJ/m² @Temperature -40.0 - -30.0 °C | 3.38 - 22.8 ft-lb/in² @Temperature -40.0 - -22.0 °F |
Izod Impact, Unnotched (ISO) | 65.0 - 74.0 kJ/m² @Temperature -30.0 - -30.0 °C | 30.9 - 35.2 ft-lb/in² @Temperature -22.0 - -22.0 °F |
Charpy Impact Unnotched | 3.60 J/cm² - NB | 17.1 ft-lb/in² - NB |
| 3.00 J/cm² - NB @Temperature -40.0 - -30.0 °C | 14.3 ft-lb/in² - NB @Temperature -40.0 - -22.0 °F |
Charpy Impact, Notched | 0.400 - 4.50 J/cm² | 1.90 - 21.4 ft-lb/in² |
| 0.300 - 4.50 J/cm² @Temperature -40.0 - -30.0 °C | 1.43 - 21.4 ft-lb/in² @Temperature -40.0 - -22.0 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Electrical Resistivity | 1.00e+9 - 1.00e+15 ohm-cm | 1.00e+9 - 1.00e+15 ohm-cm |
Surface Resistance | 1.00e+10 - 1.00e+13 ohm | 1.00e+10 - 1.00e+13 ohm |
Dielectric Strength | 14.0 - 45.0 kV/mm | 356 - 1140 kV/in |
Dissipation Factor | 0.00450 - 0.0200 | 0.00450 - 0.0200 |
Comparative Tracking Index | 500 - 690 V | 500 - 690 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear | 10.0 - 30.0 µm/m-°C | 5.56 - 16.7 µin/in-°F |
| 8.00 - 15.0 µm/m-°C @Temperature 55.0 - 160 °C | 4.44 - 8.33 µin/in-°F @Temperature 131 - 320 °F |
CTE, linear, Transverse to Flow | 10.0 - 101 µm/m-°C | 5.56 - 56.0 µin/in-°F |
| 75.0 - 100 µm/m-°C @Temperature 55.0 - 160 °C | 41.7 - 55.6 µin/in-°F @Temperature 131 - 320 °F |
Specific Heat Capacity | 2.05 - 2.30 J/g-°C @Temperature 285 - 325 °C | 0.490 - 0.550 BTU/lb-°F @Temperature 545 - 617 °F |
Thermal Conductivity | 0.220 - 0.260 W/m-K @Temperature 285 - 325 °C | 1.53 - 1.80 BTU-in/hr-ft²-°F @Temperature 545 - 617 °F |
Melting Point | 235 - 310 °C | 455 - 590 °F |
Maximum Service Temperature, Air | 90.0 - 270 °C | 194 - 518 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 220 - 300 °C | 428 - 572 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 145 - 285 °C | 293 - 545 °F |
Deflection Temperature at 8.0 MPa | 60.0 - 235 °C | 140 - 455 °F |
Glass Transition Temp, Tg | 45.0 - 90.0 °C | 113 - 194 °F |
Flammability, UL94 | HB - 5VA | HB - 5VA |
Flame Spread | 17.0 - 80.0 mm/min | 0.669 - 3.15 in/min |
|
Processing Properties | Metric | English | Comments |
---|
Processing Temperature | 70.0 - 315 °C | 158 - 599 °F |
Nozzle Temperature | 271 - 320 °C | 520 - 608 °F |
Die Temperature | 310 - 320 °C | 590 - 608 °F |
Melt Temperature | 225 - 330 °C | 437 - 626 °F |
Mold Temperature | 45.0 - 120 °C | 113 - 248 °F |
Drying Temperature | 70.0 - 100 °C | 158 - 212 °F |
Moisture Content | 0.0500 - 0.200 % | 0.0500 - 0.200 % |
Injection Pressure | 3.45 - 150 MPa | 500 - 21800 psi |
Hot-Working Temperature | 300 - 315 °C | 572 - 599 °F |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.