|
Physical Properties | Original Value | Comments |
---|
Density | 1.03 - 1.46 g/cc |
| 0.920 - 0.930 g/cc @Temperature 263 - 290 °C |
Filler Content | 13.0 - 50.0 % |
Water Absorption | 0.0100 - 8.00 % |
Moisture Absorption at Equilibrium | 0.170 - 3.10 % |
| 1.70 - 2.30 % @Temperature 70.0 - 70.0 °C |
Water Absorption at Saturation | 4.50 - 9.00 % |
Viscosity | 110000 - 120000 cP @Temperature 280 - 280 °C |
| 110000 - 120000 cP @Pressure 6.89 - 6.89 MPa |
Viscosity Number | 120 - 156 cm³/g |
Maximum Moisture Content | 0.0200 - 0.200 |
| 0.200 - 0.200 @Temperature 120 - 120 °C |
| 0.200 - 0.200 @Time 299 - 299 sec |
Linear Mold Shrinkage | 0.000 - 0.0350 cm/cm |
| 0.0120 - 0.0200 cm/cm @Temperature 80.0 - 80.0 °C |
Linear Mold Shrinkage, Transverse | 0.000500 - 0.0302 cm/cm |
| 0.0140 - 0.0200 cm/cm @Temperature 80.0 - 80.0 °C |
Melt Flow | 1.00 - 80.0 g/10 min |
Spiral Flow | 0.800 - 77.0 cm |
Ash | 13.0 - 33.0 % |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell M | 55.0 - 114 |
Hardness, Rockwell R | 69.0 - 120 |
| 114 - 114 @Temperature 80.0 - 80.0 °C |
Hardness, Shore D | 70.0 - 81.0 |
Ball Indentation Hardness | 55.0 - 215 MPa |
Tensile Strength, Ultimate | 28.0 - 331 MPa |
| 80.0 - 80.0 MPa @Temperature -40.0 - -40.0 °C |
Tensile Strength, Yield | 30.0 - 155 MPa |
Elongation at Break | 0.000 - 290 % |
| 20.0 - 20.0 % @Temperature -40.0 - 150 °C |
Elongation at Yield | 2.00 - 210 % |
Modulus of Elasticity | 0.600 - 41.4 GPa |
| 0.180 - 0.500 GPa @Temperature 60.0 - 150 °C |
Flexural Yield Strength | 17.0 - 507 MPa |
| 15.0 - 105 MPa @Temperature -40.0 - 90.0 °C |
Flexural Modulus | 0.500 - 36.2 GPa |
| 0.300 - 2.40 GPa @Temperature -40.0 - 90.0 °C |
Compressive Yield Strength | 32.0 - 100 MPa |
Poissons Ratio | 0.350 - 0.460 |
Shear Strength | 41.0 - 57.0 MPa |
Izod Impact, Notched | 0.481 - 5340 J/cm |
| 0.300 - 7.50 J/cm @Temperature -40.0 - -20.0 °C |
| 0.5339 - 2.6695 J/cm @Temperature -40.0 - 72.8 °C |
| 0.5339 - 2.6695 J/cm @Thickness 3.17 - 3.17 mm |
Izod Impact, Unnotched | 0.124 J/cm - NB |
Izod Impact, Notched (ISO) | 5.00 kJ/m² - NB |
| 7.70 - 90.0 kJ/m² @Temperature -40.0 - -20.0 °C |
Izod Impact, Unnotched (ISO) | 16.0 - 21000 kJ/m² |
| 10.0 kJ/m² - NB @Temperature -40.0 - -30.0 °C |
Charpy Impact Unnotched | 5.00 J/cm² - NB |
| 1.596 J/cm² - NB @Temperature -40.0 - -20.0 °C |
Charpy Impact, Notched | 0.399 J/cm² - NB |
| 0.399 - 8.30 J/cm² @Temperature -40.0 - -20.0 °C |
Gardner Impact | 36.2 - 38.0 J |
| 12.2024 - 12.2024 J @Temperature -40.0 - -40.0 °C |
Dart Drop, Total Energy | 50.0 - 50.0 J @Temperature -20.0 - -20.0 °C |
Tensile Creep Modulus, 1 hour | 800 - 1200 MPa |
Tensile Creep Modulus, 1000 hours | 400 - 750 MPa |
Taber Abrasion, mg/1000 Cycles | 6.00 - 8.00 |
|
Electrical Properties | Original Value | Comments |
---|
Electrical Resistivity | 1.00 - 1.00e+16 ohm-cm |
Surface Resistance | 1.00 - 2.00e+15 ohm |
Dielectric Constant | 2.70 - 10.0 |
Dielectric Strength | 9.84 - 120 kV/mm |
Dissipation Factor | 0.00500 - 0.510 |
Dielectric Loss Index | 0.0130 - 0.130 |
Arc Resistance | 60.0 - 360 sec |
Comparative Tracking Index | 450 - 600 V |
Hot Wire Ignition, HWI | 7.00 - 60.0 sec |
High Amp Arc Ignition, HAI | 120 - 200 arcs |
High Voltage Arc-Tracking Rate, HVTR | 0.000 - 80.0 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear | 14.9 - 150 µm/m-°C |
| 160 - 160 µm/m-°C @Temperature 55.0 - 160 °C |
| 86.0 - 168 µm/m-°C @Temperature 35.0 - 55.0 °C |
| 86.0 - 168 µm/m-°C @Thickness 2.00 - 2.00 mm |
CTE, linear, Transverse to Flow | 75.0 - 149 µm/m-°C |
| 130 - 130 µm/m-°C @Temperature 55.0 - 160 °C |
Specific Heat Capacity | 2.73 - 2.73 J/g-°C @Temperature 290 - 290 °C |
Thermal Conductivity | 0.210 - 0.280 W/m-K |
| 0.140 - 0.140 W/m-K @Temperature 290 - 290 °C |
Melting Point | 249 - 275 °C |
Maximum Service Temperature, Air | 65.0 - 220 °C |
Hot Ball Pressure Test | 125 - 220 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 80.0 - 260 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 43.0 - 260 °C |
Vicat Softening Point | 154 - 252 °C |
Minimum Service Temperature, Air | -30.0 - 100 °C |
Glass Transition Temp, Tg | 20.0 - 80.0 °C |
UL RTI, Electrical | 65.0 - 140 °C |
UL RTI, Mechanical with Impact | 65.0 - 120 °C |
UL RTI, Mechanical without Impact | 65.0 - 130 °C |
Flammability, UL94 | HB - 5VA |
Flame Spread | 12.0 - 100 mm/min |
Oxygen Index | 20.0 - 33.0 % |
Glow Wire Test | 550 - 960 °C |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 260 - 310 °C |
Nozzle Temperature | 243 - 310 °C |
Melt Temperature | 220 - 310 °C |
Mold Temperature | 26.7 - 121 °C |
Drying Temperature | 60.0 - 130 °C |
Moisture Content | 0.0300 - 2.80 % |
Dew Point | -40.0 - -17.8 °C |
Injection Pressure | 3.50 - 138 MPa |
Vent Depth | 0.000762 cm |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.