Mitsui Arlen™ C215 15% Glass Fiber-Reinforced Modified Nylon 6T (DAM)

Login to see your most recently viewed materials here. Or if you don't have an account with us yet, then click here to register.

Mitsui Arlen™ C215 15% Glass Fiber-Reinforced Modified Nylon 6T (DAM)
Categories:	Polymer; Thermoplastic; Nylon (Polyamide PA)
Material Notes:	ARLEN™ is a heat resistant, modified polyamide 6T developed by Mitsui Chemicals, Inc. With a high melting point (320°C) and a rigidity level comparable to super engineering plastics, it possesses strong dimensional stability and chemical resistance. In addition, the effect of water absorption, which is a traditional weakness of polyamides, has been reduced to a minimum. Applications: Connectors Jacks Switches Power supply terminals Various cases Information provided by Mitsui.
Vendors:

Available Properties

Density, ASTM D792
Filler Content
Water Absorption, ASTM D570, 24 hours in 23°C water
Water Absorption, ASTM D570, 24 hours in 100°C water
Linear Mold Shrinkage, Flow, ASTM D955
Linear Mold Shrinkage, Transverse, ASTM D955, Vertical Direction
Hardness, Rockwell M, ASTM D785
Tensile Strength at Break, ASTM D638
Elongation at Break, ASTM D638, Measured between the chucks
Flexural Strength, ASTM D790
Flexural Modulus, ASTM D790
Izod Impact, Notched, ASTM D256
Volume Resistivity, ASTM D257
Dielectric Constant, ASTM D150
Dielectric Strength, ASTM D149
Dissipation Factor, ASTM D150
CTE, linear, ASTM D696, Vertical Direction
CTE, linear, Parallel to Flow, ASTM D696
Melting Point
Deflection Temperature at 1.8 MPa (264 psi), ASTM D648
Glass Transition Temp, Tg
Flammability, UL94
Feed Temperature, Hopper Bottom for Electronic and Electric Standard Molding
Feed Temperature, Hopper Bottom Temp for Mechanical and Structural Standard Molding
Nozzle Temperature, NH Cylinder Temp for Electronic and Electric Standard Molding
Nozzle Temperature, NH Cylinder Temp for Mechanical and Structural Standard Molding
Zone 1, C1 Cylinder Temp for Electronic and Electric Standard Molding
Zone 1, C1 Cylinder Temp for Mechanical and Structural Standard Molding
Zone 2, C2 Cylinder Temp for Electronic and Electric Standard Molding
Zone 2, C2 Cylinder Temp for Mechanical and Structural Standard Molding
Zone 3, C3 Cylinder Temp for Electronic and Electric Standard Molding
Zone 3, C3 Cylinder Temp for Mechanical and Structural Standard Molding
Mold Temperature, for Electronic and Electric Standard Molding
Mold Temperature, for Mechanical and Structural Standard Molding
Screw Speed, for Mechanical and Structural Standard Molding
Screw Speed, for Electronic and Electric Standard Molding

Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc), please click the button below.

Manufacturer Notes:
Mitsui Chemicals America

Category Notes
Plastic
PA, Polyamide

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

	Advertise with MatWeb!
	Data sheets for over 180,000 metals, plastics, ceramics, and composites.
	HOME • SEARCH • TOOLS • SUPPLIERS • FOLDERS • ABOUT US • FAQ • LOG IN

System Message