MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  
Master Bond adhesives
Overview of materials for Thermoplastic Olefinic Elastomer (TPO)
Categories: Polymer; Thermoplastic; Elastomer, TPE; Thermoplastic Olefinic Elastomer (TPO)

Material Notes: This property data is a summary of similar materials in the MatWeb database for the category "Thermoplastic Olefinic Elastomer (TPO)". Each property range of values reported is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points used to calculate the average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected by additives or processing methods.

Vendors:
Available Properties
  • Density, Average value: 1.00 g/cc Grade Count:822
  • Filler Content, Average value: 18.9 % Grade Count:20
  • Water Absorption, Average value: 0.0258 % Grade Count:19
  • Viscosity, Average value: 277000 cP Grade Count:29
  • Viscosity, Average value: 277000 cP Grade Count:29
  • Mooney Viscosity, Average value: 11.8 Grade Count:3
  • Environmental Stress Crack Resistance, Average value: 1000 hour Grade Count:4
  • Thickness, Average value: 24.1 microns Grade Count:3
  • Linear Mold Shrinkage, Average value: 0.0120 cm/cm Grade Count:212
  • Linear Mold Shrinkage, Transverse, Average value: 0.00900 cm/cm Grade Count:16
  • Melt Flow, Average value: 16.7 g/10 min Grade Count:714
  • Ash, Average value: 11.0 % Grade Count:16
  • Ash, Average value: 19.0 % Grade Count:3
  • Hardness, Rockwell R, Average value: 76.5 Grade Count:31
  • Hardness, Shore A, Average value: 68.4 Grade Count:136
  • Hardness, Shore D, Average value: 54.1 Grade Count:216
  • Ball Indentation Hardness, Average value: 35.6 MPa Grade Count:7
  • Tensile Strength, Ultimate, Average value: 11.9 MPa Grade Count:275
  • Film Tensile Strength at Yield, MD, Average value: 4.50 MPa Grade Count:4
  • Film Tensile Strength at Yield, TD, Average value: 4.34 MPa Grade Count:4
  • Tensile Strength, Yield, Average value: 18.9 MPa Grade Count:560
  • Film Elongation at Break, MD, Average value: 438 % Grade Count:4
  • Film Elongation at Break, TD, Average value: 645 % Grade Count:4
  • Elongation at Break, Average value: 441 % Grade Count:363
  • Elongation at Yield, Average value: 18.8 % Grade Count:199
  • Modulus of Elasticity, Average value: 0.742 GPa Grade Count:39
  • Flexural Yield Strength, Average value: 26.2 MPa Grade Count:60
  • Flexural Modulus, Average value: 1.38 GPa Grade Count:667
  • Secant Modulus, Average value: 0.101 GPa Grade Count:10
  • Secant Modulus, MD, Average value: 0.0522 GPa Grade Count:4
  • Secant Modulus, TD, Average value: 0.0552 GPa Grade Count:4
  • Izod Impact, Notched, Average value: 5.34 J/cm Grade Count:119
  • Izod Impact, Notched, Average value: 1.27 J/cm Grade Count:54
  • Izod Impact, Unnotched, Average value: 6.94 J/cm Grade Count:14
  • Izod Impact, Notched (ISO), Average value: 39.7 kJ/m² Grade Count:271
  • Izod Impact, Notched (ISO), Average value: 7.78 kJ/m² Grade Count:187
  • Charpy Impact Unnotched, Average value: 20.8 J/cm² Grade Count:47
  • Charpy Impact Unnotched, Average value: 18.0 J/cm² Grade Count:15
  • Charpy Impact, Notched, Average value: 3.95 J/cm² Grade Count:116
  • Charpy Impact, Notched, Average value: 1.07 J/cm² Grade Count:68
  • Gardner Impact, Average value: 54.4 J Grade Count:75
  • Gardner Impact, Average value: 27.6 J Grade Count:74
  • Gardner Impact, Average value: 27.6 J Grade Count:1
  • Gardner Impact, Average value: 27.6 J Grade Count:1
  • Dart Drop, Total Energy, Average value: 16.7 J Grade Count:3
  • Dart Drop, Total Energy, Average value: 22.9 J Grade Count:20
  • Falling Dart Impact, Average value: 26.0 J Grade Count:2
  • Instrumented Impact Total Energy, Average value: 15.0 J Grade Count:8
  • Tear Strength, Average value: 112 kN/m Grade Count:162
  • Graves Tear Strength, Average value: 28.7 kN/m Grade Count:12
  • Elmendorf Tear Strength, MD, Average value: 8.46 g/micron Grade Count:3
  • Elmendorf Tear Strength, TD, Average value: 16.6 g/micron Grade Count:3
  • Dart Drop, Average value: 42.4 g/micron Grade Count:3
  • Taber Abrasion, mg/1000 Cycles, Average value: 89.2 Grade Count:9
  • Compression Set, Average value: 41.6 % Grade Count:77
  • Tensile Set, Average value: 8.54 % Grade Count:12
  • Film Tensile Strength at Break, MD, Average value: 61.8 MPa Grade Count:4
  • Film Tensile Strength at Break, TD, Average value: 52.8 MPa Grade Count:4
  • Tangent Modulus, Average value: 1500 MPa Grade Count:11
  • Dynatup @ -30°C, Average value: 38.2 J Grade Count:5
  • Electrical Resistivity, Average value: 9.00e+14 ohm-cm Grade Count:16
  • Surface Resistance, Average value: 9.63e+10 ohm Grade Count:13
  • Static Decay, Average value: 1.83 sec Grade Count:9
  • Dielectric Constant, Average value: 2.47 Grade Count:5
  • Dielectric Strength, Average value: 23.6 kV/mm Grade Count:7
  • Dissipation Factor, Average value: 0.00499 Grade Count:4
  • Comparative Tracking Index, Average value: 600 V Grade Count:5
  • CTE, linear, Average value: 68.7 µm/m-°C Grade Count:146
  • CTE, linear, Average value: 85.0 µm/m-°C Grade Count:1
  • Melting Point, Average value: 114 °C Grade Count:22
  • Deflection Temperature at 0.46 MPa (66 psi), Average value: 94.5 °C Grade Count:248
  • Deflection Temperature at 1.8 MPa (264 psi), Average value: 56.5 °C Grade Count:180
  • Vicat Softening Point, Average value: 81.7 °C Grade Count:36
  • Brittleness Temperature, Average value: -52.2 °C Grade Count:36
  • Flammability, UL94, Grade Count:29
  • Oxygen Index, Average value: 30.0 % Grade Count:12
  • Haze, Average value: 6.31 % Grade Count:7
  • Gloss, Average value: 74.2 % Grade Count:19
  • Processing Temperature, Average value: 191 °C Grade Count:54
  • Nozzle Temperature, Average value: 210 °C Grade Count:73
  • Die Temperature, Average value: 203 °C Grade Count:49
  • Melt Temperature, Average value: 200 °C Grade Count:131
  • Mold Temperature, Average value: 39.2 °C Grade Count:136
  • Roll Temperature, Average value: 35.0 °C Grade Count:42
  • Drying Temperature, Average value: 80.5 °C Grade Count:79
  • Moisture Content, Average value: 0.0313 % Grade Count:15
  • Dew Point, Average value: -17.8 °C Grade Count:17
  • Injection Pressure, Average value: 46.6 MPa Grade Count:99
  • Cycle Time - Injection, Average value: 1.25 sec Grade Count:9
  • Cushion, Average value: 0.628 cm Grade Count:7
  • Cure Time, Average value: 0.250 min Grade Count:9
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

Manufacturer Notes:
none

Category Notes
Plastic
Thermoplastic Elastomer

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

 

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.