Available Properties |
---|
- Density, ISO 1183
- Water Absorption, Sim to ISO 62
- Moisture Absorption, Sim to ISO 62
- Linear Mold Shrinkage, Flow, ISO 294-4, 2577
- Linear Mold Shrinkage, Transverse, ISO 294-4, 2577
- Melt Flow, ISO 1133
- Hardness, Shore D, ASTM D2240, annealed
- Tensile Strength at Break, ASTM D638, var. test speed
- Tensile Strength, ISO 527
- Tensile Strength, Yield, ISO 527
- Tensile Strength, Yield, ASTM D638, var. test speed
- Tensile Strength, Yield, ASTM D638, annealed
- Tensile Strength, Yield
- Tensile Strength, Yield
- Tensile Strength, Yield
- Tensile Strength, Yield
- Elongation at Break, ISO 527, Nominal
- Elongation at Break, ASTM D638, annealed, Nominal
- Elongation at Break, ASTM D638, var. test speed, Nominal
- Elongation at Yield, ISO 527
- Elongation at Yield, ASTM D638, annealed
- Elongation at Yield, ASTM D638, var. test speed
- Tensile Modulus, ISO 527
- Tensile Modulus, ASTM D638, annealed
- Tensile Modulus, ASTM D638, var. test speed
- Flexural Strength, ISO 178, at conv. Deflection
- Flexural Strength, ISO 178
- Flexural Strength, ASTM D790, annealed
- Flexural Strength, ASTM D790, annealed
- Flexural Modulus, ISO 178
- Flexural Modulus, ASTM D790, annealed
- Flexural Strain at Break, ISO 178, at flexural strength
- Secant Modulus
- Secant Modulus
- Secant Modulus
- Charpy Impact Unnotched, ISO 179/1eU
- Charpy Impact Unnotched, ISO 179/1eU
- Charpy Impact, Notched, ISO 179/1eA, Type of failure: C
- Charpy Impact, Notched, ISO 179/1eA, Type of failure: C
- Volume Resistivity, IEC 62631-3-1, ?V
- Surface Resistance, IEC 62631-3-2
- Dielectric Constant, IEC 62631-2-1
- Dielectric Constant, IEC 62631-2-1
- Dissipation Factor, IEC 62631-2-1
- Comparative Tracking Index, IEC 60112, test solution A, 50 drops value
- Hot Wire Ignition, HWI, IEC 60695-2-20
- CTE, linear, Parallel to Flow, ISO 11359-1/-2
- Melting Point, ISO 11357-1/-3
- Deflection Temperature at 0.46 MPa (66 psi), ISO 75-1/-2
- Deflection Temperature at 1.8 MPa (264 psi), ISO 75-1/-2
- Vicat Softening Point, ISO 306, 50 K/h
- Vicat Softening Point, ISO 306, 50 K/h
- Flammability, UL94
- Flammability, UL94
- Oxygen Index, ISO 4589-1/-2
- Oxygen Index, ASTM D2863
- Melt Temperature, ISO 294, Injection Molding
- Mold Temperature, ISO 294, Injection Molding
- Injection Velocity, ISO 294, Injection Molding
- Hold Pressure, ISO 294, Injection Molding
|
| | |