MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  
Master Bond adhesives
Solvay CYCOM® 890 RTM Resin - Woven Carbon Fabric Composite
Categories: Polymer; Thermoset; Carbon Fiber/Thermoset Composite; Epoxy; Epoxy/Carbon Fiber Composite

Material Notes: CYCOM® 890 RTM is a one-part liquid epoxy resin system. It has one month out-life at room temperature which reduces the time required for the freeze-thaw-storage processes in a production environment. Its frozen storage shelf-life is 12 months at -18°C (0°F). CYCOM 890 RTM’s viscosity is low enough at 80°C (175°F) to allow injection without excessive heating of either the resin or the transfer pipework. When the resin is heated to cure temperature its viscosity is further reduced, helping to ensure full wet-out of the reinforcing fibers. CYCOM 890 RTM is fully cured after two hours at 180°C (355°F) after which it will have a continuous dry service performance of 170°C (338°F) and a continuous hot/wet service performance of 160°C (320°F) If needed, an optional free-standing postcure for two hours at 200°C (390°F) can be used. After postcure the resin will have a continuous dry service performance of 195°C (383°F) and a continuous hot/wet service performance of 170°C (338°F). CYCOM 890 RTM is compatible with the range of reinforcing fibers used in manufacturing composite components, i.e., carbon, glass, aramid, etc. A fully compatible binder system, CYCOM® 7720 has been developed for use with CYCOM 890 RTM. The binder is available pre-coated onto fabric. A separate datasheet for CYCOM 7720 is available on request.

Features & Benefits:

  • One-part system
  • 30 day out-life at room temperature
  • 12 month shelf-life at -18°C (0°F)
  • Injectable at 80°C (175°F) with a 24-hour pot-life
  • 250 cps initial injection viscosity
  • Less than 10 cps minimum viscosity
  • Two hours at 180°C (355°F) cure
  • 170°C (350°F) continuous dry service performance [195°C (383°F) after optional post-cure]
  • 160°C (320°F) continuous hot/wet service performance [170°C (338°F) after optional post-cure]
  • Fully compatible with CYCOM 7720 binder coating and CYCOM® 890-1 low resin content (LRC) filmfor tack enhancing fabrics
  • Low reactivity; No special shipping requirements
Applications: Infusion applications requiring low viscosity and extended pot-life
  • Control surfaces
  • Nacelle casing
  • Large surface fairings
  • Hinges/brackets/fittings
Mechanical property data for epoxy with 57% fiber volume T650 6K-5HS woven carbon fabric. 'Wet' property data after equilibration at 160 °F (70C) and 85% RH.

Information provided by Cytec, subsequently acquired by Solvay.

Vendors:
Available Properties
  • Density
  • Tensile Strength, Open Hole
  • Tensile Strength, Open Hole
  • Tensile Strength, Open Hole, wet
  • Tensile Strength, Un-Notched
  • Tensile Strength, Un-Notched
  • Tensile Strength, Un-Notched, wet
  • Tensile Strength, SACMA SRM-4, Weft
  • Tensile Strength, SACMA SRM-4, Weft
  • Tensile Strength, SACMA SRM-4, Warp
  • Tensile Strength, SACMA SRM-4, Weft, wet
  • Tensile Modulus, ASTM D638, Warp
  • Tensile Modulus, ASTM D638, Weft
  • Tensile Modulus, ASTM D638, Weft
  • Tensile Modulus, ASTM D638, Weft, Wet
  • Flexural Strength, ASTM D790, Weft
  • Flexural Modulus, ASTM D790, Weft
  • Compressive Strength, After impact, Wet
  • Compressive Strength, Open Hole, Wet
  • Compressive Strength, After impact
  • Compressive Strength, After impact
  • Compressive Strength, Open Hole
  • Compressive Strength, Open Hole
  • Compressive Strength, Un-Notched, Wet
  • Compressive Strength, Un-Notched
  • Compressive Strength, Un-Notched
  • Compressive Strength, SACMA SRM-1, Weft, Wet
  • Compressive Strength, SACMA SRM-1, Warp
  • Compressive Strength, SACMA SRM-1, Weft
  • Compressive Strength, SACMA SRM-1, Weft
  • Compressive Modulus, SACMA SRM-1, Weft
  • Compressive Modulus, SACMA SRM-1, Weft
  • Compressive Modulus, SACMA SRM-1, Weft, Wet
  • Compressive Modulus, SACMA SRM-1, Warp
  • Shear Modulus, In-plane
  • Shear Modulus, In-plane, Wet
  • Shear Modulus, In-plane
  • Shear Modulus, In-plane
  • Shear Strength, Weft
  • Shear Strength, Warp
  • Shear Strength, In-plane, Wet
  • Shear Strength, In-plane
  • Shear Strength, In-plane
  • Maximum Service Temperature, Air, wet
  • Maximum Service Temperature, Air, dry
  • Glass Transition Temp, Tg, E' onset, 48 hr water boil
  • Glass Transition Temp, Tg, E' onset
  • Glass Transition Temp, Tg, peak tan delta
  • Glass Transition Temp, Tg, peak tan delta, wet, 48 hr water boil
  • Processing Temperature, Cure
  • Shelf Life
  
Property Data

This page displays only the text
of a material data sheet.

To see MatWeb's complete data
sheet for this material (including
material property data, metal
compositions, material suppliers,
etc
), please click the button below.

Manufacturer Notes:
Solvay, former Rhodia Engineering Plastics

Category Notes
Plastic

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

 

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.