|
Physical Properties | Original Value | Comments |
---|
Density | 1.02 g/cc |
Water Absorption | 1.30 % |
Moisture Absorption | 0.500 % |
Linear Mold Shrinkage, Flow | 0.00900 cm/cm |
Linear Mold Shrinkage, Transverse | 0.0120 cm/cm |
Melt Flow | 53.0 g/10 min @Load 5.00 kg, Temperature 275 °C |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 42.0 MPa |
Tensile Strength | 26.0 MPa |
Tensile Stress | 26.0 MPa @Strain 50.0 % |
| 6.00 MPa @Strain 5.00 %, Temperature 120 °C |
| 7.00 MPa @Strain 5.00 %, Temperature 100 °C |
| 9.00 MPa @Strain 5.00 %, Temperature 80.0 °C |
| 11.0 MPa @Strain 5.00 %, Temperature 60.0 °C |
| 12.0 MPa @Strain 5.00 %, Temperature 40.0 °C |
| 12.0 MPa @Strain 40.0 %, Temperature 120 °C |
| 15.0 MPa @Strain 5.00 %, Temperature 23.0 °C |
| 15.0 MPa @Strain 40.0 %, Temperature 100 °C |
| 17.0 MPa @Strain 40.0 %, Temperature 80.0 °C |
| 19.0 MPa @Strain 40.0 %, Temperature 60.0 °C |
| 20.0 MPa @Strain 0.500 %, Temperature -40.0 °C |
| 20.0 MPa @Strain 1.00 %, Temperature -20.0 °C |
| 20.0 MPa @Strain 5.00 %, Temperature 0.000 °C |
| 21.0 MPa @Strain 40.0 %, Temperature 40.0 °C |
| 24.0 MPa @Strain 40.0 %, Temperature 23.0 °C |
| 32.0 MPa @Strain 29.0 %, Temperature 0.000 °C |
| 44.0 MPa @Strain 20.0 %, Temperature -20.0 °C |
| 60.0 MPa @Strain 6.00 %, Temperature -40.0 °C |
Tensile Strength, Yield | 26.0 MPa |
Elongation at Break | 240 % |
Elongation at Yield | 32.0 % |
Tensile Modulus | 410 MPa |
| 200 MPa @Temperature 150 °C |
| 500 MPa @Temperature 50.0 °C |
| 2000 MPa @Temperature -40.0 °C |
Flexural Strength | 14.0 MPa |
| 21.0 MPa |
Flexural Modulus | 400 MPa |
Flexural Strain at Break | 9.00 % |
Secant Modulus | 0.100 GPa @Strain 40.0 %, Temperature 23.0 °C |
| 0.100 GPa @Strain 3.00 %, Temperature 120 °C |
| 0.150 GPa @Strain 28.0 %, Temperature 0.000 °C |
| 0.230 GPa @Strain 3.00 %, Temperature 100 °C |
| 0.250 GPa @Strain 3.00 %, Temperature 80.0 °C |
| 0.250 GPa @Strain 20.0 %, Temperature -20.0 °C |
| 0.320 GPa @Strain 3.00 %, Temperature 60.0 °C |
| 0.350 GPa @Strain 3.00 %, Temperature 40.0 °C |
| 0.400 GPa @Strain 3.00 %, Temperature 23.0 °C |
| 0.600 GPa @Strain 0.000 %, Temperature 0.000 °C |
| 0.850 GPa @Strain 40.0 %, Temperature 120 °C |
| 0.880 GPa @Strain 40.0 %, Temperature 100 °C |
| 0.920 GPa @Strain 40.0 %, Temperature 80.0 °C |
| 0.950 GPa @Strain 40.0 %, Temperature 60.0 °C |
| 0.990 GPa @Strain 40.0 %, Temperature 40.0 °C |
| 1.25 GPa @Strain 0.000 %, Temperature -20.0 °C |
| 2.00 GPa @Strain 0.000 %, Temperature -40.0 °C |
| 6.00 GPa @Strain 10.0 %, Temperature -40.0 °C |
Charpy Impact Unnotched | NB @Temperature 23.0 °C |
| NB @Temperature 0.000 °C |
| NB @Temperature -30.0 °C |
Charpy Impact, Notched | 7.00 kJ/m² @Temperature -30.0 °C |
| 120 kJ/m² @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+10 ohm-cm |
Dielectric Constant | 4.60 @Frequency 1.00e+6 Hz |
| 11.0 @Frequency 100 Hz |
Dielectric Strength | 30.0 kV/mm |
Dissipation Factor | 0.190 @Frequency 1.00e+6 Hz |
| 0.200 @Frequency 100 Hz |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 180 µm/m-°C @Temperature 25.0 - 55.0 °C |
CTE, linear, Transverse to Flow | 180 µm/m-°C @Temperature 25.0 - 55.0 °C |
Melting Point | 172 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 100 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 45.0 °C |
Vicat Softening Point | 130 °C @Load 5.10 kg |
| 165 °C @Load 1.02 kg |
Glass Transition Temp, Tg | 13.0 °C |
Flammability, UL94 | HB @Thickness 1.60 mm |
| HB @Thickness 3.20 mm |
|
Processing Properties | Original Value | Comments |
---|
Melt Temperature | 220 °C |
| 220 °C |
Mold Temperature | 60.0 °C |
| 60.0 °C |
Injection Velocity | 200 mm/sec |
Hold Pressure | 70.0 MPa |
|
Descriptive Properties |
---|
Color | Black |
Flexural stress at break | N |
| N |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.