MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  

Master Bond adhesives

(Viewing data as-entered. Click here to return)
Momentive Performance Materials RTV88 Red Extreme High Temperature Potting/Encapsulating Compound
Categories: Polymer; Thermoset; Rubber or Thermoset Elastomer (TSE); Silicone; Silicone, RTV, Encapsulation Grade

Material Notes: Two-part condensation cure. Two-part condensation cure silicones RTVs are designed to cute at room temperature, and can be applied at temperature up to one inch (2.5 cm). These are very tough materials, highly resistant to contamination, and will not be affected by other chemicals during cure or after. Typical uses: Potting surge protectors. Aerospace such as sealing, bonding, and gasketing on vertical or overhead surfaces.

Data provided by the manufacturer, GE Silicones.

GE Silicones became a part of Momentive Performance Materials in 2006.

Key Words: RTV Silicones; R.T.V. Silicones
Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
 
Physical PropertiesOriginal ValueComments
Density 1.47 g/cc
Viscosity 880000 cP
@Temperature 25.0 °C
Linear Mold Shrinkage 0.0060 cm/cm
 
Mechanical PropertiesOriginal ValueComments
Hardness, Shore A 58
Tensile Strength, Ultimate 5.79 MPa
Elongation at Break 120 %
Tear Strength 8.00 kN/mDie B
 
Electrical PropertiesOriginal ValueComments
Electrical Resistivity 2.80e+14 ohm-cm
Dielectric Constant 4.3
@Frequency 1000 Hz
Dielectric Strength 17.4 kV/mm
@Thickness 1.91 mm
Dissipation Factor 0.030
@Frequency 1000 Hz
 
Thermal PropertiesOriginal ValueComments
CTE, linear 200 µm/m-°C
@Temperature 20.0 °C
Thermal Conductivity 0.310 W/m-K
Maximum Service Temperature, Air 260 °CContinuous useful temperature.
Minimum Service Temperature, Air -54.0 °CContinuous useful temperature.
 
Processing PropertiesOriginal ValueComments
Processing Temperature 25.0 °CCure time 24 hrs.
Pot Life 45.0 min
@Temperature 25.0 °C

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to go back to viewing the property data in MatWeb's normal format.

Users viewing this material also viewed the following:
ATG s.r.l. FPM Fluoroelastomer
Momentive Performance Materials RTV88 Silicone Rubber Compound for High Temperature, Red
Tipco Tipcolene® FPM 40 - 40% Mica Reinforced Polypropylene Homopolymer, High Stiffness
Teknor Apex Flexalloy® OR 9800-55 Polyvinyl Chloride Elastomer
Precision Polymer Engineering E50E Ethylene Propylene Rubber

PZZGE976 / 40530

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.