|
Physical Properties | Original Value | Comments |
---|
Density | 2.84 g/cc |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Brinell | 130 |
Hardness, Knoop | 163 |
Hardness, Rockwell A | 49.5 |
Hardness, Rockwell B | 80 |
Hardness, Vickers | 149 |
Tensile Strength, Ultimate | 66.0 ksi |
| >= 400 MPa |
| >= 400 MPa |
| 30.0 MPa @Temperature 371 °C |
| 48.0 MPa @Temperature 316 °C |
| 200 MPa @Temperature 260 °C |
| 248 MPa @Temperature 204 °C |
| 338 MPa @Temperature 149 °C |
| 414 MPa @Temperature 100 °C |
| 455 MPa @Temperature 24.0 °C |
| 476 MPa @Temperature -28.0 °C |
| 490 MPa @Temperature -80.0 °C |
| 572 MPa @Temperature -196 °C |
| >= 395 MPa @Thickness 127.0 - 152 mm |
| >= 405 MPa @Thickness 101.6 - 127 mm |
| >= 415 MPa @Thickness 76.23 - 102 mm |
| >= 425 MPa @Thickness 6.35 - 50.8 mm |
| >= 425 MPa @Thickness 50.83 - 76.2 mm |
| >= 395 MPa @Diameter 50.83 - 102 mm |
| >= 400 MPa @Diameter 12.7 - 50.8 mm |
Tensile Strength, Yield | 51.0 ksi |
| >= 290 MPa |
| >= 290 MPa |
| >= 290 MPa @Thickness 127.0 - 152 mm |
| >= 295 MPa @Thickness 101.6 - 127 mm |
| >= 305 MPa @Thickness 76.23 - 102 mm |
| >= 310 MPa @Thickness 50.83 - 76.2 mm |
| >= 315 MPa @Thickness 6.35 - 50.8 mm |
| >= 270 MPa @Diameter 50.83 - 102 mm |
| >= 275 MPa @Diameter 12.7 - 50.8 mm |
| 26.0 MPa @Strain 0.2 %, Temperature 371 °C |
| 41.0 MPa @Strain 0.2 %, Temperature 316 °C |
| 159 MPa @Strain 0.2 %, Temperature 260 °C |
| 200 MPa @Strain 0.2 %, Temperature 204 °C |
| 276 MPa @Strain 0.2 %, Temperature 149 °C |
| 324 MPa @Strain 0.2 %, Temperature 100 °C |
| 345 MPa @Strain 0.2 %, Temperature 24.0 °C |
| 359 MPa @Strain 0.2 %, Temperature -28.0 °C |
| 372 MPa @Strain 0.2 %, Temperature -80.0 °C |
| 421 MPa @Strain 0.2 %, Temperature -196 °C |
Elongation at Break | 6.0 % |
| 6.0 % |
| 12 % @Temperature -28.0 °C |
| 12 % @Temperature 24.0 °C |
| 13 % @Temperature -80.0 °C |
| 15 % @Temperature -196 °C |
| 15 % @Temperature 100 °C |
| 17 % @Temperature 149 °C |
| 20 % @Temperature 204 °C |
| 21 % @Temperature 260 °C |
| 55 % @Temperature 316 °C |
| 75 % @Temperature 371 °C |
| 4.0 % @Thickness 127.0 - 152 mm |
| 5.0 % @Thickness 76.23 - 102 mm |
| 5.0 % @Thickness 101.6 - 127 mm |
| 6.0 % @Thickness 50.83 - 76.2 mm |
| 7.0 - 8.0 % @Thickness 6.35 - 50.8 mm |
| 10 % @Thickness 1.59 mm |
| 4.0 % @Diameter 12.7 - 50.8 mm |
| 4.0 % @Diameter 50.83 - 102 mm |
Modulus of Elasticity | 10600 ksi |
Poissons Ratio | 0.33 |
Fatigue Strength | 15000 psi @# of Cycles 5.00e+8 |
Shear Modulus | 27.0 GPa |
Shear Strength | 285 MPa |
|
Electrical Properties | Original Value | Comments |
---|
Electrical Resistivity | 0.00000570 ohm-cm |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear | 12.4 µin/in-°F @Temperature 20.0 - 100 °C |
| 20.8 µm/m-°C @Temperature -50.0 - 20.0 °C |
| 22.5 µm/m-°C @Temperature 20.0 - 100 °C |
| 23.4 µm/m-°C @Temperature 20.0 - 200 °C |
| 24.1 µm/m-°C @Temperature 20.0 - 300 °C |
| 24.4 µm/m-°C @Temperature 20.0 - 300 °C |
Specific Heat Capacity | 0.864 J/g-°C |
Thermal Conductivity | 120 W/m-K |
Melting Point | 1010 - 1190 °F |
Solidus | 1010 °F |
Liquidus | 1190 °F |
|
Processing Properties | Original Value | Comments |
---|
Annealing Temperature | 775 °F |
Solution Temperature | 995 °F |
Aging Temperature | 325 - 375 °F |
|
Component Elements Properties | Original Value | Comments |
---|
Aluminum, Al | 91.5 - 93.8 % |
Copper, Cu | 5.8 - 6.8 % |
Iron, Fe | <= 0.30 % |
Magnesium, Mg | <= 0.02 % |
Manganese, Mn | 0.20 - 0.40 % |
Other, each | <= 0.05 % |
Other, total | <= 0.15 % |
Silicon, Si | <= 0.20 % |
Titanium, Ti | 0.02 - 0.10 % |
Vanadium, V | 0.05 - 0.15 % |
Zinc, Zn | <= 0.10 % |
Zirconium, Zr | 0.10 - 0.25 % |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.