MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  

Elmet Technologies

(Viewing data as-entered. Click here to return)
Tin Brass, UNS C41300, OS025 Temper, Wire
Categories: Metal; Nonferrous Metal; Copper Alloy; Brass

Material Notes: Temper: Nominal Grain Size 0.025 mm

Fabrication Properties: Excellent Suitability – Soldering, Brazing, Capacity for Being Cold Worked; Good Suitability – Oxyacetylene Welding, Butt Weld, Capacity for Being Hot Formed; Fair Suitability – Gas Shielded Arc Welding, Spot Weld

Common Fabrication Processes: Bending; Blanking; Coining; Drawing; Forming; Spinning; Stamping

Typical uses: Hardware; Compacts; Costume Jewelry; Lipstick Cases; Electrical Connectors; Flat Springs for Electrical Switch gear; Fuse Clips; Fasteners; Screws; Bearings; Bushings; Plater Bar for Jewelry; Thrust Washers

Applicable Specifications: Bar – ASTM B591; Plate – ASTM B591; Sheet – ASTM B591; Strip - ASTM B591

Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
 
Physical PropertiesOriginal ValueComments
Density 0.318 lb/in³
 
Mechanical PropertiesOriginal ValueComments
Tensile Strength 46.0 ksi
@Thickness 2.03 mm
Tensile Strength, Yield 20.0 ksi
@Thickness 2.03 mm
0.5% Ext
Elongation at Break 42 %
@Thickness 2.03 mm
Tensile Modulus 16000 ksi
Modulus of Rigidity 6000 ksi
Poissons Ratio 0.33Calculated
Machinability 20 %
Forgeability 50 %
Shear Strength 36.0 ksi
@Thickness 2.03 mm
 
Electrical PropertiesOriginal ValueComments
Electrical Resistivity 0.00000570 ohm-cm30% IACS
 
Thermal PropertiesOriginal ValueComments
CTE, linear 10.3 µin/in-°F
@Temperature 20.0 - 300 °C
Specific Heat Capacity 0.0900 BTU/lb-°F
Thermal Conductivity 77.0 BTU-in/hr-ft²-°F
Melting Point 1850 - 1900 °F
Solidus 1850 °F
Liquidus 1900 °F
Annealing Point 900 - 1400 °F
 
Processing PropertiesOriginal ValueComments
Hot-Working Temperature 1415 - 1460 °F
 
Component Elements PropertiesOriginal ValueComments
Copper, Cu 89 - 93 %
Iron, Fe <= 0.50 %
Lead, Pb <= 0.090 %
Tin, Sn 0.70 - 1.3 %
Zinc, Zn 5.1 - 10.3 %As Balance
 
Descriptive Properties
US EPA Registered AntimicrobialYes

References for this datasheet.

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to go back to viewing the property data in MatWeb's normal format.

MC41300z8 / 292977

Proto3000 – 3D Engineering Solutions

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.