|
Physical Properties | Metric | English | Comments |
---|
Density | 1.16 g/cc | 0.0419 lb/in³ |
Moisture Absorption at Equilibrium | 1.6 - 2.0 % | 1.6 - 2.0 % |
Water Absorption at Saturation | 6.5 - 7.5 % | 6.5 - 7.5 % |
Viscosity Measurement | 130 | 130 |
Linear Mold Shrinkage | 0.0060 cm/cm | 0.0060 in/in |
|
Mechanical Properties | Metric | English | Comments |
---|
Tensile Strength | 10.0 MPa @Strain 2 %, Temperature 100 °C | 1450 psi @Strain 2 %, Temperature 212 °F |
| 40.0 MPa @Strain 2 %, Temperature 80.0 °C | 5800 psi @Strain 2 %, Temperature 176 °F |
| 60.0 MPa @Strain 2 %, Temperature 60.0 °C | 8700 psi @Strain 2 %, Temperature 140 °F |
| 75.0 MPa @Strain 2 %, Temperature 23.0 °C | 10900 psi @Strain 2 %, Temperature 73.4 °F |
Tensile Strength, Yield | 100 MPa | 14500 psi |
Tensile Stress at Strain | 20.0 MPa @Strain 5.0 %, Temperature 100 °C | 2900 psi @Strain 5.0 %, Temperature 212 °F |
| 25.0 MPa @Strain 8.0 %, Temperature 100 °C | 3630 psi @Strain 8.0 %, Temperature 212 °F |
| 50.0 MPa @Strain 5.0 %, Temperature 80.0 °C | 7250 psi @Strain 5.0 %, Temperature 176 °F |
| 50.0 MPa @Strain 8.0 %, Temperature 80.0 °C | 7250 psi @Strain 8.0 %, Temperature 176 °F |
| 73.0 MPa @Strain 8.0 %, Temperature 60.0 °C | 10600 psi @Strain 8.0 %, Temperature 140 °F |
| 75.0 MPa @Strain 5.0 %, Temperature 60.0 °C | 10900 psi @Strain 5.0 %, Temperature 140 °F |
| 80.0 MPa @Strain 8.0 %, Temperature 23.0 °C | 11600 psi @Strain 8.0 %, Temperature 73.4 °F |
| 110 MPa @Strain 5.0 %, Temperature 23.0 °C | 16000 psi @Strain 5.0 %, Temperature 73.4 °F |
Elongation at Yield | 8.0 % | 8.0 % |
Modulus of Elasticity | 3.20 GPa | 464 ksi |
| 1.75 GPa @Temperature 100 °C | 254 ksi @Temperature 212 °F |
| 3.00 GPa @Temperature 80.0 °C | 435 ksi @Temperature 176 °F |
| 3.50 GPa @Temperature 60.0 °C | 508 ksi @Temperature 140 °F |
| 3.75 GPa @Temperature 40.0 °C | 544 ksi @Temperature 104 °F |
Flexural Modulus | 2.90 GPa | 421 ksi |
Izod Impact, Notched (ISO) | 7.00 kJ/m² @Temperature 23.0 °C | 3.33 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact Unnotched | 10.5 J/cm² @Temperature -30.0 °C | 50.0 ft-lb/in² @Temperature -22.0 °F |
| 12.0 J/cm² @Temperature 23.0 °C | 57.1 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 1.00 J/cm² @Temperature -30.0 °C | 4.76 ft-lb/in² @Temperature -22.0 °F |
| 1.30 J/cm² @Temperature 23.0 °C | 6.19 ft-lb/in² @Temperature 73.4 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm |
Dielectric Constant | 4.0 @Frequency 1e+6 Hz | 4.0 @Frequency 1e+6 Hz |
Dissipation Factor | 0.030 @Frequency 1e+6 Hz | 0.030 @Frequency 1e+6 Hz |
Comparative Tracking Index | 600 V | 600 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 60.0 - 80.0 µm/m-°C @Temperature 23.0 - 80.0 °C | 33.3 - 44.4 µin/in-°F @Temperature 73.4 - 176 °F |
Specific Heat Capacity | 1.50 J/g-°C | 0.359 BTU/lb-°F |
Thermal Conductivity | 0.230 W/m-K | 1.60 BTU-in/hr-ft²-°F |
Melting Point | 295 °C | 563 °F |
Maximum Service Temperature, Air | 110 °C | 230 °F |
| 130 °C | 266 °F |
| 250 °C | 482 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 95.0 °C | 203 °F |
Flammability, UL94 | HB @Thickness 1.60 mm | HB @Thickness 0.0630 in |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 310 - 330 °C | 590 - 626 °F |
Mold Temperature | 70.0 - 100 °C | 158 - 212 °F |
|
Descriptive Properties |
---|
Commercial Status | Europe |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.