|
Physical Properties | Metric | English | Comments |
---|
Density | 1.51 g/cc | 0.0546 lb/in³ |
Water Absorption at Saturation | 0.30 % @Temperature 23.0 °C | 0.30 % @Temperature 73.4 °F |
| 0.45 % @Temperature 100 °C | 0.45 % @Temperature 212 °F |
Viscosity | 275000 cP @Temperature 400 °C | 275000 cP @Temperature 752 °F |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in |
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in |
Spiral Flow | 15.0 cm @Thickness 1.00 mm | 5.91 in @Thickness 0.0394 in |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore D | 87 | 87 |
Tensile Strength at Break | 45.0 MPa @Temperature 275 °C | 6530 psi @Temperature 527 °F |
| 65.0 MPa @Temperature 225 °C | 9430 psi @Temperature 437 °F |
| 75.0 MPa @Temperature 175 °C | 10900 psi @Temperature 347 °F |
| 125 MPa @Temperature 125 °C | 18100 psi @Temperature 257 °F |
| 200 MPa @Temperature 23.0 °C | 29000 psi @Temperature 73.4 °F |
Elongation at Break | 2.7 % | 2.7 % |
Tensile Modulus | 12.0 GPa | 1740 ksi |
Flexural Strength | 75.0 MPa @Temperature 275 °C | 10900 psi @Temperature 527 °F |
| 120 MPa @Temperature 175 °C | 17400 psi @Temperature 347 °F |
| 230 MPa @Temperature 125 °C | 33400 psi @Temperature 257 °F |
| 290 MPa @Temperature 23.0 °C | 42100 psi @Temperature 73.4 °F |
Flexural Modulus | 11.5 GPa | 1670 ksi |
Compressive Strength | 55.0 MPa @Temperature 200 °C | 7980 psi @Temperature 392 °F |
| 160 MPa @Temperature 120 °C | 23200 psi @Temperature 248 °F |
| 250 MPa @Temperature 23.0 °C | 36300 psi @Temperature 73.4 °F |
Izod Impact, Notched (ISO) | 10.5 kJ/m² @Temperature 23.0 °C | 5.00 ft-lb/in² @Temperature 73.4 °F |
Izod Impact, Unnotched (ISO) | 60.0 kJ/m² @Temperature 23.0 °C | 28.6 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact Unnotched | 5.50 J/cm² @Temperature 23.0 °C | 26.2 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 0.750 J/cm² @Temperature 23.0 °C | 3.57 ft-lb/in² @Temperature 73.4 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm |
Dielectric Constant | 3.3 @Frequency 1000 Hz | 3.3 @Frequency 1000 Hz |
Dielectric Strength | 23.0 kV/mm @Thickness 2.00 mm | 584 kV/in @Thickness 0.0787 in |
Dissipation Factor | 0.0040 @Frequency 1e+6 Hz | 0.0040 @Frequency 1e+6 Hz |
Comparative Tracking Index | 150 V | 150 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 20.0 µm/m-°C @Temperature <=143 °C | 11.1 µin/in-°F @Temperature <=289 °F |
| 20.0 µm/m-°C @Temperature >=143 °C | 11.1 µin/in-°F @Temperature >=289 °F |
CTE, linear, Transverse to Flow | 45.0 µm/m-°C @Temperature <=143 °C | 25.0 µin/in-°F @Temperature <=289 °F |
| 110 µm/m-°C @Temperature >=143 °C | 61.1 µin/in-°F @Temperature >=289 °F |
Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F |
| 0.350 W/m-K | 2.43 BTU-in/hr-ft²-°F |
Melting Point | 343 °C | 649 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 335 °C | 635 °F |
Glass Transition Temp, Tg | 143 °C | 289 °F |
| 147 °C | 297 °F |
UL RTI, Electrical | 240 °C | 464 °F |
UL RTI, Mechanical with Impact | 220 °C | 428 °F |
UL RTI, Mechanical without Impact | 240 °C | 464 °F |
Glow Wire Flammability Index | 960 °C @Thickness 50.8 mm | 1760 °F @Thickness 2.00 in |
|
Processing Properties | Metric | English | Comments |
---|
Processing Temperature | <= 100 °C | <= 212 °F |
Rear Barrel Temperature | 360 °C | 680 °F |
Middle Barrel Temperature | 365 - 370 °C | 689 - 698 °F |
Front Barrel Temperature | 375 °C | 707 °F |
Nozzle Temperature | 380 °C | 716 °F |
Mold Temperature | 170 - 200 °C | 338 - 392 °F |
Dry Time | 3.00 - 5.00 hour @Temperature 120 - 150 °C | 3.00 - 5.00 hour @Temperature 248 - 302 °F |
|
Descriptive Properties |
---|
Gate | >2 mm or 0.5 x part thickness |
Runner | >3.5mm |
| >3mm |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.