|
Physical Properties | Metric | English | Comments |
---|
Density | 1.57 g/cc | 0.0567 lb/in³ |
Melt Density | 1.40 g/cc @Temperature 295 °C | 0.0506 lb/in³ @Temperature 563 °F |
Water Absorption | 4.2 % @Thickness 2.00 mm | 4.2 % @Thickness 0.0787 in |
| 0.80 % @Thickness 2.00 mm, Time 86400 sec | 0.80 % @Thickness 0.0787 in, Time 24.0 hour |
Moisture Absorption | 1.20 % @Thickness 2.00 mm | 1.20 % @Thickness 0.0787 in |
Viscosity Number | 105 cm³/g | 1.05 dl/g |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in |
Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in |
|
Mechanical Properties | Metric | English | Comments |
---|
Ball Indentation Hardness | 300 MPa | 43500 psi |
Tensile Strength at Break | 170 MPa | 24700 psi |
| 240 MPa | 34800 psi |
Elongation at Break | 2.4 % | 2.4 % |
| 3.5 % | 3.5 % |
Tensile Modulus | 13.0 GPa | 1890 ksi |
| 17.0 GPa | 2470 ksi |
Flexural Strength | 280 MPa | 40600 psi |
| 400 MPa | 58000 psi |
| 270 MPa @Strain 3.5 % | 39200 psi @Strain 3.5 % |
Flexural Modulus | 12.0 GPa | 1740 ksi |
| 16.0 GPa | 2320 ksi |
Compressive Strength | 215 MPa | 31200 psi |
Poissons Ratio | 0.33 | 0.33 |
| 0.33 | 0.33 |
Shear Strength | 90.0 MPa | 13100 psi |
Charpy Impact Unnotched | 9.00 J/cm² @Temperature -30.0 °C | 42.8 ft-lb/in² @Temperature -22.0 °F |
| 9.00 J/cm² @Temperature -30.0 °C | 42.8 ft-lb/in² @Temperature -22.0 °F |
| 9.00 J/cm² @Temperature 23.0 °C | 42.8 ft-lb/in² @Temperature 73.4 °F |
| 9.50 J/cm² @Temperature 23.0 °C | 45.2 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 1.40 J/cm² @Temperature -30.0 °C | 6.66 ft-lb/in² @Temperature -22.0 °F |
| 1.50 J/cm² @Temperature -30.0 °C | 7.14 ft-lb/in² @Temperature -22.0 °F |
| 1.50 J/cm² @Temperature 23.0 °C | 7.14 ft-lb/in² @Temperature 73.4 °F |
| 2.00 J/cm² @Temperature 23.0 °C | 9.52 ft-lb/in² @Temperature 73.4 °F |
Puncture Energy | 10.0 J @Temperature 23.0 °C | 7.38 ft-lb @Temperature 73.4 °F |
Tensile Creep Modulus, 1 hour | 10000 MPa | 1.45e+6 psi |
Tensile Creep Modulus, 1000 hours | 8000 MPa | 1.16e+6 psi |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm |
Surface Resistance | 4.00e+14 ohm | 4.00e+14 ohm |
Dielectric Strength | 30.0 kV/mm | 762 kV/in |
Comparative Tracking Index | 500 V | 500 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 9.00 µm/m-°C | 5.00 µin/in-°F |
| 13.0 µm/m-°C @Temperature -40.0 - 23.0 °C | 7.22 µin/in-°F @Temperature -40.0 - 73.4 °F |
| 19.0 µm/m-°C @Temperature 23.0 - 55.0 °C | 10.6 µin/in-°F @Temperature 73.4 - 131 °F |
| 19.0 µm/m-°C @Temperature 55.0 - 160 °C | 10.6 µin/in-°F @Temperature 131 - 320 °F |
CTE, linear, Transverse to Flow | 72.0 µm/m-°C | 40.0 µin/in-°F |
| 42.0 µm/m-°C @Temperature -40.0 - 23.0 °C | 23.3 µin/in-°F @Temperature -40.0 - 73.4 °F |
| 61.0 µm/m-°C @Temperature 23.0 - 55.0 °C | 33.9 µin/in-°F @Temperature 73.4 - 131 °F |
| 114 µm/m-°C @Temperature 55.0 - 160 °C | 63.3 µin/in-°F @Temperature 131 - 320 °F |
Specific Heat Capacity | 1.87 J/g-°C @Temperature 295 °C | 0.447 BTU/lb-°F @Temperature 563 °F |
Thermal Conductivity | 0.460 W/m-K | 3.19 BTU-in/hr-ft²-°F |
| 0.310 W/m-K @Temperature 295 °C | 2.15 BTU-in/hr-ft²-°F @Temperature 563 °F |
Melting Point | 262 °C | 504 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 261 °C | 502 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 255 °C | 491 °F |
Vicat Softening Point | 255 °C | 491 °F |
Glass Transition Temp, Tg | 20.0 °C | 68.0 °F |
| 65.0 °C | 149 °F |
Flammability, UL94 | HB @Thickness 0.830 mm | HB @Thickness 0.0327 in |
| HB @Thickness 1.50 mm | HB @Thickness 0.0591 in |
Oxygen Index | 24 % | 24 % |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 295 °C | 563 °F |
| 285 - 305 °C | 545 - 581 °F |
Mold Temperature | 70.0 - 120 °C | 158 - 248 °F |
| 100 °C | 212 °F |
Ejection Temperature | 210 °C | 410 °F |
Drying Temperature | 80.0 °C | 176 °F |
Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour |
Moisture Content | <= 0.20 % | <= 0.20 % |
Hold Pressure | 50.0 - 100 MPa | 7250 - 14500 psi |
|
Descriptive Properties |
---|
Additives | Release agent |
Drying Recommended | yes |
Emission of organic compounds (µgC/g) | 6.5 |
FMVSS Class | SE |
Fogging (mg) | 0.4 |
ISO designation | ISO 16396-PA66,GF50,M1CGHR,S10-160 |
Max. screw tangential speed (m/s) | 0.2 |
Odor Class | 3 |
Part Marking Code | >PA66-GF50< |
Polymer | PA66-GF50 |
Processing Hold Pressure Time (s/mm) | 3 |
Resin Identification | PA66-GF50 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.