|
Physical Properties | Metric | English | Comments |
---|
Density | 1.43 g/cc | 0.0517 lb/in³ |
Water Absorption at Saturation | 0.40 % @Temperature 23.0 °C | 0.40 % @Temperature 73.4 °F |
| 0.45 % @Temperature 100 °C | 0.45 % @Temperature 212 °F |
Viscosity | 230000 cP @Temperature 400 °C | 230000 cP @Temperature 752 °F |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in |
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in |
Spiral Flow | 16.0 cm @Thickness 1.00 mm | 6.30 in @Thickness 0.0394 in |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Shore D | 86 | 86 |
Tensile Strength at Break | 40.0 MPa @Temperature 275 °C | 5800 psi @Temperature 527 °F |
| 50.0 MPa @Temperature 225 °C | 7250 psi @Temperature 437 °F |
| 70.0 MPa @Temperature 175 °C | 10200 psi @Temperature 347 °F |
| 115 MPa @Temperature 125 °C | 16700 psi @Temperature 257 °F |
| 160 MPa @Temperature 23.0 °C | 23200 psi @Temperature 73.4 °F |
| 170 MPa @Temperature -55.0 °C | 24700 psi @Temperature -67.0 °F |
Elongation at Break | 2.4 % @Temperature 23.0 °C | 2.4 % @Temperature 73.4 °F |
Tensile Modulus | 9.00 GPa @Temperature 23.0 °C | 1310 ksi @Temperature 73.4 °F |
Flexural Strength | 60.0 MPa @Temperature 275 °C | 8700 psi @Temperature 527 °F |
| 100 MPa @Temperature 175 °C | 14500 psi @Temperature 347 °F |
| 190 MPa @Temperature 125 °C | 27600 psi @Temperature 257 °F |
| 250 MPa @Temperature 23.0 °C | 36300 psi @Temperature 73.4 °F |
| 270 MPa @Temperature -55.0 °C | 39200 psi @Temperature -67.0 °F |
Flexural Modulus | 8.50 GPa @Temperature 23.0 °C | 1230 ksi @Temperature 73.4 °F |
Compressive Strength | 60.0 MPa @Temperature 200 °C | 8700 psi @Temperature 392 °F |
| 160 MPa @Temperature 120 °C | 23200 psi @Temperature 248 °F |
| 250 MPa @Temperature 23.0 °C | 36300 psi @Temperature 73.4 °F |
Izod Impact, Notched (ISO) | 7.50 kJ/m² @Temperature 23.0 °C | 3.57 ft-lb/in² @Temperature 73.4 °F |
Izod Impact, Unnotched (ISO) | 35.0 kJ/m² @Temperature 23.0 °C | 16.7 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact Unnotched | 3.50 J/cm² @Temperature 23.0 °C | 16.7 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 0.600 J/cm² @Temperature 23.0 °C | 2.86 ft-lb/in² @Temperature 73.4 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm |
Dielectric Constant | 3.2 @Frequency 1000 Hz, Temperature 23.0 °C | 3.2 @Frequency 1000 Hz, Temperature 73.4 °F |
Dielectric Strength | 23.0 kV/mm @Thickness 2.00 mm | 584 kV/in @Thickness 0.0787 in |
Dissipation Factor | 0.0040 @Frequency 1e+6 Hz, Temperature 23.0 °C | 0.0040 @Frequency 1e+6 Hz, Temperature 73.4 °F |
Comparative Tracking Index | 150 V | 150 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 25.0 µm/m-°C @Temperature <=143 °C | 13.9 µin/in-°F @Temperature <=289 °F |
| 25.0 µm/m-°C @Temperature >=143 °C | 13.9 µin/in-°F @Temperature >=289 °F |
CTE, linear, Transverse to Flow | 45.0 µm/m-°C @Temperature <=143 °C | 25.0 µin/in-°F @Temperature <=289 °F |
| 110 µm/m-°C @Temperature >=143 °C | 61.1 µin/in-°F @Temperature >=289 °F |
Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft²-°F |
| 0.350 W/m-K @Temperature 23.0 °C | 2.43 BTU-in/hr-ft²-°F @Temperature 73.4 °F |
Melting Point | 343 °C | 649 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 323 °C | 613 °F |
Glass Transition Temp, Tg | 143 °C | 289 °F |
| 147 °C | 297 °F |
|
Processing Properties | Metric | English | Comments |
---|
Processing Temperature | <= 100 °C | <= 212 °F |
Rear Barrel Temperature | 360 °C | 680 °F |
Middle Barrel Temperature | 365 - 370 °C | 689 - 698 °F |
Front Barrel Temperature | 375 °C | 707 °F |
Nozzle Temperature | 380 °C | 716 °F |
Mold Temperature | 170 - 200 °C | 338 - 392 °F |
Drying Temperature | 120 - 150 °C @Time 7200 - 18000 sec | 248 - 302 °F @Time 2.00 - 5.00 hour |
|
Descriptive Properties |
---|
Gate | >2 mm or 0.5 x part thickness |
Runner | >3.5mm |
| >3mm |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.