MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  

Master Bond adhesives

DuPont Mobility and Materials Minlon® 11C40 BKB086 PA66-IMD40  (discontinued **)
Categories: Polymer; Thermoplastic; Nylon (Polyamide PA); Nylon 66 (PA66); Nylon 66, 40% Mineral Filled

Material Notes: 40% Mineral Reinforced Polyamide 66

While this product line has been acquired by Celanese, this specific grade had been disconued while still a DuPont product so it is listed here as a discontinued DuPont product.

Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
 
Physical PropertiesMetricEnglishComments
Density 1.46 g/cc0.0527 lb/in³DAM; ISO 1183
Water Absorption 1.1 %
@Time 86400 sec
1.1 %
@Time 24.0 hour
Immersion; DAM; Sim. to ISO 62
 5.7 %
@Thickness 2.00 mm
5.7 %
@Thickness 0.0787 in
DAM; Sim. to ISO 62
Moisture Absorption 1.80 %
@Thickness 2.00 mm
1.80 %
@Thickness 0.0787 in
DAM; Sim. to ISO 62
Linear Mold Shrinkage, Flow 0.0090 cm/cm0.0090 in/inDAM; ISO 294-4, 2577
Linear Mold Shrinkage, Transverse 0.0090 cm/cm0.0090 in/inDAM; ISO 294-4, 2577
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 86.0 MPa12500 psiDAM; ISO 527-1/-2
Elongation at Break 10 %10 %DAM; ISO 527-1/-2
Tensile Modulus 5.80 GPa841 ksiDAM; ISO 527-1/-2
Flexural Modulus 5.30 GPa769 ksiDAM; ISO 178
Poissons Ratio 0.350.35DAM; ISO 527-1/-2
Izod Impact, Notched (ISO)  5.00 kJ/m²
@Temperature -40.0 °C
2.38 ft-lb/in²
@Temperature -40.0 °F
DAM; ISO 180/1A
 6.00 kJ/m²
@Temperature 23.0 °C
2.86 ft-lb/in²
@Temperature 73.4 °F
DAM; ISO 180/1A
Izod Impact, Unnotched (ISO) 95.0 kJ/m²
@Temperature 23.0 °C
45.2 ft-lb/in²
@Temperature 73.4 °F
DAM; ISO 180/1U
Charpy Impact Unnotched 18.0 J/cm²
@Temperature 23.0 °C
85.7 ft-lb/in²
@Temperature 73.4 °F
DAM; ISO 179/1eU
Charpy Impact, Notched  0.300 J/cm²
@Temperature -40.0 °C
1.43 ft-lb/in²
@Temperature -40.0 °F
DAM; ISO 179/1eA
 0.600 J/cm²
@Temperature 23.0 °C
2.86 ft-lb/in²
@Temperature 73.4 °F
DAM; ISO 179/1eA
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 64.0 µm/m-°C35.6 µin/in-°FDAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow 65.0 µm/m-°C36.1 µin/in-°FDAM; ISO 11359-1/-2
Melting Point 256 °C493 °F10°C/min; DAM; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 210 °C410 °FDAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 90.0 °C194 °FDAM; ISO 75-1/-2
Flammability, UL94  HB
@Thickness 0.810 mm
HB
@Thickness 0.0319 in
DAM; IEC 60695-11-10
 HB
@Thickness 1.50 mm
HB
@Thickness 0.0591 in
DAM; IEC 60695-11-10
Flame Spread <= 80.0 mm/min
@Thickness 1.00 mm
<= 3.15 in/min
@Thickness 0.0394 in
ISO 3795 (FMVSS 302)
 
Processing PropertiesMetricEnglishComments
Melt Temperature 295 °C563 °FInjection Optimum
 285 - 305 °C545 - 581 °FInjection
Mold Temperature 70.0 - 120 °C158 - 248 °FInjection
 100 °C212 °FInjection Optimum
Ejection Temperature 210 °C410 °F
Drying Temperature 80.0 °C176 °F
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDehumidified Dryer
Moisture Content 0.20 %0.20 %
Hold Pressure 50.0 - 100 MPa7250 - 14500 psi
 
Descriptive Properties
Drying Recommendedyes
FMVSS ClassBISO 3795 (FMVSS 302)
Fogging (mg)0.1G-value (condensate); ISO 6452; DAM
Hold pressure time (s/mm)3
Max. screw tangential speed (m/s)0.2DAM
Part Marking CodePA66-IMD40ISO 11469
Regional AvailabilityNorth America
 South and Central America
Resin IdentificationPA66-IMD40ISO 1043
Special characteristicsHeat stabilized or stable to heat

**
Materials flagged as discontinued () are no longer part of the manufacturer’s standard product line according to our latest information. These materials may be available by special order, in distribution inventory, or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials.

Users of our Advanced Search (registration required) may exclude discontinued materials from search results.

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

Users viewing this material also viewed the following:
DuPont Mobility and Materials Minlon® 11C40 NC010 PA66-IMD40
DuPont Mobility and Materials Minlon® 11C140 NC010 PA66-IMD40
DuPont Mobility and Materials Minlon® 11C140 BK086 PA66-IMD40
Overview of materials for Nylon 66, 40% Mineral Filled
Avient Nymax™ MF 1200 40 HS Black 13 Nylon 66 with 40% Mineral

PDSX5242 / 197882

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.