Unreinforced, impact modified, heat stabilized Amodel® AT-1002 HS is a neat, toughened, heat stabilized polyphthalamide (PPA) resin that offers superior retention of properties after humid thermal aging; high impact at low temperature and better mechanical properties than many unreinforced thermoplastic polyester and nylon resins. This material was specifically designed for automotive electrical/electronic applications such as connectors, sockets and sensors. - Natural: AT-1002 HS NT Markets/Uses: Automotive / Automotive E/E / Engine Sensors; Automotive / Automotive E/E / Sensors; Automotive / Automotive E/E / Wire Harness Connectors; Automotive / Fuel Systems / Fuel Flanges; Automotive / Fuel Systems / Rollover Valves Applications: Automotive Applications; Automotive Electronics; Automotive Under the Hood; Machine/Mechanical Parts; Metal Replacement; Valves/Valve Parts Features: Chemical Resistant; Ductile; Heat Stabilized; Hot Water Moldability; Impact Modified; Low Temperature Impact Resistance; Low Warpage; Lubricated Injection notes: INJECTION RATE: 1 to 3 in/sec HOLDING PRESSURE: 50% of injection pressure STORAGE: - Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide. Information provided by Solvay Specialty Polymers. |