Available Properties |
---|
- Bulk Density, ISO 60, pellets
- Density, ISO 1183-1
- Moisture Absorption at Equilibrium, ISO 62, 50% RH
- Water Absorption at Saturation, ISO 62
- Linear Mold Shrinkage, Flow, ISO 294-4, 60x60x2 mm; 500 bar
- Linear Mold Shrinkage, Transverse, ISO 294-4, 60x60x2 mm; 500 bar
- Melt Flow, ISO 1133
- Puncture Resistance, ISO 6603-2
- Puncture Resistance, ISO 6603-2
- Ball Indentation Hardness, ISO 2039-1
- Tensile Strength at Break, ISO 527-1,-2, 50 mm/min
- Tensile Strength, Yield, ISO 527-1,-2, 50 mm/min
- Elongation at Break, ISO 527-1,-2, Nominal, 50 mm/min
- Elongation at Break, b.o. ISO 527-1,-2, 50 mm/min
- Elongation at Yield, ISO 527-1,-2, 50 mm/min
- Tensile Modulus, ISO 527-1,-2, 1 mm/min
- Flexural Strength, ISO 178, 2 mm/min
- Flexural Yield Strength, ISO 178, 2 mm/min
- Flexural Modulus, ISO 178, 2 mm/min
- Flexural Strain at Yield, ISO 178, 2 mm/min
- Izod Impact, Notched (ISO), b.o. ISO 180-A, complete break
- Izod Impact, Notched (ISO), b.o. ISO 180-A, partial break
- Charpy Impact Unnotched, ISO 179-1eU
- Charpy Impact Unnotched, ISO 179-1eU
- Charpy Impact Unnotched, ISO 179-1eU
- Charpy Impact, Notched, ISO 7391/b.o. ISO 179-1eA, complete break
- Charpy Impact, Notched, ISO 7391/b.o. ISO 179-1eA, partial break
- Puncture Energy, ISO 6603-2
- Puncture Energy, ISO 6603-2
- Volume Resistivity, IEC 60093
- Surface Resistance, IEC 60093
- Dielectric Constant, IEC 60250
- Dielectric Constant, IEC 60250
- Dielectric Strength, IEC 60243-1
- Dissipation Factor, IEC 60250
- Dissipation Factor, IEC 60250
- Comparative Tracking Index, IEC 60112, CTI M; Solution B
- Comparative Tracking Index, IEC 60112, Solution A
- CTE, linear, Parallel to Flow, ISO 11359-1,-2
- CTE, linear, Transverse to Flow, ISO 11359-1,-2
- Thermal Conductivity, ISO 8302, cross-flow
- Hot Ball Pressure Test, IEC 60695-10-2
- Deflection Temperature at 0.46 MPa (66 psi), ISO 75-1,-2
- Deflection Temperature at 1.8 MPa (264 psi), ISO 75-1,-2
- Vicat Softening Point, ISO 306, 50°C/h
- Vicat Softening Point, ISO 306, 120°C/h
- Flash Point, ASTM D 1929
- Flash Point, ASTM D 1929, self ignition
- Oxygen Index, IEC 4589-2, Method A
- Glow Wire Ignition Temperature, IEC 60695-2-13
- Glow Wire Ignition Temperature, IEC 60695-2-13
- Glow Wire Ignition Temperature, IEC 60695-2-13
- Glow Wire Flammability Index, IEC 60695-2-12
- Glow Wire Flammability Index, IEC 60695-2-12
- Glow Wire Flammability Index, IEC 60695-2-12
- Shrinkage, b.o. ISO 2577
- Melt Temperature, ISO 294, Injection molding
- Mold Temperature, ISO 294, Injection molding
- Injection Velocity, ISO 294
|
| | |