MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  

Master Bond adhesives

(Viewing data as-entered. Click here to return)
Mitsubishi Xantar® RX 2121 Polycarbonate
Categories: Polymer; Thermoplastic; Polycarbonate (PC); Polycarbonate, Molded

Material Notes: A versatile thermoplastic resin that is suitable for a wide range of applications and can be converted using all common melt-processing techniques.

Information provided by Mitsubishi Engineering Plastics Corporation.

Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
 
Physical PropertiesOriginal ValueComments
Density 1.34 g/cc
Melt Density 1.14 g/cc
@Temperature 300 °C
Water Absorption 0.35 %
Viscosity Number 46 cm³/gLimiting Viscosity Number
 50 cm³/g
Linear Mold Shrinkage, Flow 0.0060 cm/cm
Melt Flow 12 g/10 min
@Load 1.20 kg,
Temperature 300 °C
cm³/10 min Volumetric Rate
 
Mechanical PropertiesOriginal ValueComments
Tensile Strength, Yield 58.0 MPa
Elongation at Break 20 %
Elongation at Yield 6.0 %
Tensile Modulus 2500 MPa
Flexural Strength 85.0 MPa
Flexural Modulus 2600 MPa
Izod Impact, Notched (ISO) 65.0 kJ/m²
 
Electrical PropertiesOriginal ValueComments
Volume Resistivity >= 1.00e+15 ohm-cm
Surface Resistance >= 1.00e+15 ohm
Dielectric Constant 2.9
@Frequency 1e+6 Hz
 3.0
@Frequency 100 Hz
Dielectric Strength 29.0 kV/mm
Dissipation Factor 0.00066
@Frequency 100 Hz
 0.0092
@Frequency 1e+6 Hz
 
Thermal PropertiesOriginal ValueComments
CTE, linear, Parallel to Flow 65.0 µm/m-°C
Specific Heat Capacity 1.71 J/g-°Cmelt
Thermal Conductivity 0.240 W/m-Kmelt
Hot Ball Pressure Test 125 °C
Deflection Temperature at 1.8 MPa (264 psi) 130 °C
Vicat Softening Point 148 °C
@Load 5.10 kg
rate 50°C/h
Flammability, UL94 V-0
@Thickness 2.00 mm
Oxygen Index 35 %
Glow Wire Ignition Temperature 825 °C
@Thickness 1.50 mm
 850 °C
@Thickness 3.00 mm
Glow Wire Flammability Index 960 °C
@Thickness 1.50 mm
 960 °C
@Thickness 3.00 mm
 
Processing PropertiesOriginal ValueComments
Melt Temperature 300 °CAs Tested; Injection
Mold Temperature 90.0 °CAs Tested; Injection
Ejection Temperature 144 °C

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to go back to viewing the property data in MatWeb's normal format.

PMITSU9311 / 191985

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at info@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.