|
Physical Properties | Original Value | Comments |
---|
Density | 1.16 g/cc |
Water Absorption | 0.80 % @Time 86400 sec |
Moisture Absorption at Equilibrium | 2.3 % |
Linear Mold Shrinkage, Flow | 0.012 cm/cm @Thickness 2.00 mm |
Linear Mold Shrinkage, Transverse | 0.014 cm/cm @Thickness 2.00 mm |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength, Yield | 52.0 MPa |
| 75.0 MPa |
Elongation at Break | 25 % |
| 30 % |
Elongation at Yield | 5.5 % |
| 20 % |
Tensile Modulus | 1500 MPa |
| 3300 MPa |
Flexural Strength | 45.0 MPa |
| 92.0 MPa |
Flexural Modulus | 1560 MPa |
| 3200 MPa |
Poissons Ratio | 0.40 |
Izod Impact, Notched (ISO) | 6.00 kJ/m² @Temperature 23.0 °C |
Charpy Impact Unnotched | NB @Temperature -30.0 °C |
| NB @Temperature 23.0 °C |
Charpy Impact, Notched | 5.40 kJ/m² @Temperature -30.0 °C |
| 5.40 kJ/m² @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+11 ohm-cm @Thickness 0.750 mm |
Dielectric Strength | 13.0 kV/mm @Thickness 1.00 mm |
Arc Resistance | 120 - 180 sec @Thickness 3.00 mm |
Comparative Tracking Index | 600 V @Thickness 3.00 mm |
Hot Wire Ignition, HWI | 7.0 - 15 sec @Thickness 0.400 mm |
| 7.0 - 15 sec @Thickness 0.750 mm |
| 7.0 - 15 sec @Thickness 1.50 mm |
| 15 - 30 sec @Thickness 3.00 mm |
High Amp Arc Ignition, HAI | >= 120 arcs @Thickness 0.750 mm |
| >= 120 arcs @Thickness 1.50 mm |
| >= 120 arcs @Thickness 3.00 mm |
High Voltage Arc-Tracking Rate, HVTR | 10.0 - 25.4 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 110 µm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
CTE, linear, Transverse to Flow | 110 µm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
Melting Point | 244 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 225 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C |
UL RTI, Electrical | 130 °C |
| 130 °C @Thickness 0.750 mm |
| 130 °C @Thickness 1.50 mm |
| 130 °C @Thickness 3.00 mm |
UL RTI, Mechanical with Impact | 65.0 °C @Thickness 0.400 mm |
| 65.0 °C @Thickness 0.750 mm |
| 85.0 °C @Thickness 1.50 mm |
| 85.0 °C @Thickness 3.00 mm |
UL RTI, Mechanical without Impact | 100 °C @Thickness 0.400 mm |
| 100 °C @Thickness 0.750 mm |
| 100 °C @Thickness 1.50 mm |
| 110 °C @Thickness 3.00 mm |
Flammability, UL94 | V-0 @Thickness 0.400 mm |
| V-0 @Thickness 0.750 mm |
| V-0 @Thickness 1.50 mm |
| V-0 @Thickness 3.00 mm |
Oxygen Index | 29 % |
Glow Wire Ignition Temperature | 725 °C @Thickness 3.00 mm |
| 775 °C @Thickness 1.50 mm |
| 875 °C @Thickness 0.400 mm |
| 875 °C @Thickness 0.750 mm |
Glow Wire Flammability Index | 960 °C @Thickness 0.400 mm |
| 960 °C @Thickness 0.750 mm |
| 960 °C @Thickness 1.50 mm |
| 960 °C @Thickness 3.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Rear Barrel Temperature | 240 - 270 °C |
Middle Barrel Temperature | 240 - 270 °C |
Front Barrel Temperature | 240 - 270 °C |
Nozzle Temperature | 240 - 270 °C |
Melt Temperature | 250 - 270 °C |
Mold Temperature | 65.0 - 95.0 °C |
Drying Temperature | 80.0 °C @Time 14400 sec |
|
Descriptive Properties |
---|
Automotive Specifications | GM GMW15702-110049 |
Features | Ductile |
| Elongation, High |
| Flame Retardant |
| Good Crack Resistance |
| Good Mold Release |
| Good Toughness |
| Halogen Free |
| Low Density |
| Lubricated |
Suggested Max Regrind (%) | 50 |
Uses | Appliances |
| Automotive Electronics |
| Bobbins |
| Circuit Boards, Printed |
| Connectors |
| Electrical Parts |
| Electrical/Electronic Applications |
| Fasteners |
| Hinges, Living |
| Housing, Electrical |
| Industrial Applications |
| Lighting Applications |
| Switches |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.