(Viewing data as-entered. Click here to return)
|
Physical Properties | Original Value | Comments |
---|
Specific Gravity | 1.46 g/cc |
Density | 1.46 g/cc |
Moisture Absorption | 0.0700 % @Temperature 23.0 °C |
Water Absorption at Saturation | 0.26 % @Temperature 23.0 °C |
Viscosity | 110000 cP @Shear Rate 100 1/s, Temperature 250 °C |
Linear Mold Shrinkage, Flow | 0.0070 - 0.013 cm/cm |
| 0.0070 - 0.013 cm/cm @Thickness 3.20 mm |
Linear Mold Shrinkage, Transverse | 0.011 - 0.017 cm/cm |
Melt Flow | 25 g/10 min @Load 2.16 kg, Temperature 250 °C |
| 31 g/10 min @Load 2.16 kg, Temperature 250 °C |
| 31 g/10 min @Load 2.16 kg, Temperature 250 °C |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 66.0 MPa |
| 73.0 MPa |
Tensile Strength, Yield | 66.0 MPa |
| 73.0 MPa |
Elongation at Break | 3.1 % |
| 3.5 % |
Elongation at Yield | 3.1 % |
| 3.5 % |
Tensile Modulus | 4210 MPa |
| 4350 MPa |
Flexural Yield Strength | 115 MPa |
| 117 MPa |
Flexural Modulus | 3650 MPa |
| 3650 MPa |
Izod Impact, Notched | 36.0 J/m @Temperature -30.0 °C |
| 42.0 J/m @Temperature 23.0 °C |
Izod Impact, Unnotched | 320 J/m @Temperature -30.0 °C |
| 490 J/m @Temperature 23.0 °C |
Izod Impact, Notched (ISO) | 4.00 kJ/m² @Temperature -30.0 °C |
| 5.00 kJ/m² @Temperature 23.0 °C |
Izod Impact, Unnotched (ISO) | 21.0 kJ/m² @Temperature -30.0 °C |
| 26.0 kJ/m² @Temperature 23.0 °C |
Charpy Impact Unnotched | 27.0 kJ/m² @Temperature -30.0 °C |
| 32.0 kJ/m² @Temperature 23.0 °C |
Charpy Impact, Notched | 5.00 kJ/m² @Temperature -30.0 °C |
| 5.00 kJ/m² @Temperature 23.0 °C |
| 5.00 kJ/m² @Temperature 23.0 °C |
Instrumented Impact Total Energy | 48.0 J @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | >= 1.00e+15 ohm-cm |
Surface Resistance | >= 1.00e+13 ohm |
Dielectric Strength | 18.0 kV/mm @Thickness 3.20 mm |
| 30.7 kV/mm @Thickness 1.60 mm |
| 50.0 kV/mm @Thickness 0.800 mm |
Dissipation Factor | 0.0155 @Frequency 1e+6 Hz |
Comparative Tracking Index | 275 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 55.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 63.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
CTE, linear, Transverse to Flow | 95.0 µm/m-°C @Temperature -40.0 - 40.0 °C |
| 104 µm/m-°C @Temperature -40.0 - 40.0 °C |
Hot Ball Pressure Test | 125 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 200 °C @Thickness 3.20 mm |
Deflection Temperature at 1.8 MPa (264 psi) | 145 °C |
| 160 °C @Thickness 3.20 mm |
Vicat Softening Point | 191 °C |
| 192 °C |
| 195 °C |
| 216 °C |
| 217 °C |
UL RTI, Electrical | 130 °C |
UL RTI, Mechanical with Impact | 120 °C |
UL RTI, Mechanical without Impact | 130 °C |
Flammability, UL94 | V-0 @Thickness 0.800 mm |
Oxygen Index | 27 % |
Glow Wire Flammability Index | 960 °C @Thickness 1.00 mm |
**
This data sheet is not an active part of MatWeb and the information on it should not be considered reliable.
Inactive data sheets have usually been replaced with newer information on the same material. If this is the case, you can find the active data sheet by using any of our search tools, including the Quick Search box in the upper part of this page.
If you are unable to locate an active data sheet for this material, then this material is likely discontinued, although various other reasons may be behind its removal. In any event, do not rely on the information on this page to be accurate or maintained.
You may have reached this data sheet through an outdated bookmark or link. Please update your bookmark accordingly. We apologize if you have accessed this page through MatWeb’s usual search tools.
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.