MatWeb - Material Property Data Advertise with MatWeb!     Register Now
Data sheets for over 180,000 metals, plastics, ceramics, and composites.
MatWeb - Material Property Data HOME  •   SEARCH  •   TOOLS  •   SUPPLIERS  •   FOLDERS  •   ABOUT US  •   FAQ  •   LOG IN    
Recently Viewed Materials (most recent at top)  

Login to see your most recently viewed materials here.

Or if you don't have an account with us yet, then click here to register.

  Searches:   Advanced  | Category  | Property  | Metals  | Trade Name  | Manufacturer  | Recently Viewed Materials
  

Chemically Resistant adhesives

Celanese CoolPoly® D5108 Thermally Conductive Polyphenylene Sulfide
Categories: Polymer; Thermoplastic; Polyphenylene Sulfide (PPS)

Material Notes: CoolPoly D series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The D series is electrically non-conductive and can be used for its dielectric properties.

CoolPoly D5108 is a thermally conductive injection molding resin based on a polyphenylene sulfide (PPS) matrix. CoolPoly D5108 is electrically insulative. Thermally conductive polymers like CoolPoly D5108 cool faster than standard injection molding grade resins.

Information provided by Cool Polymers, Inc.

Celanese acquired Cool Polymers in 2014.

Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
 
Physical PropertiesMetricEnglishComments
Density 1.80 g/cc0.0650 lb/in³ISO 1183
Water Absorption 0.10 %0.10 %ISO 62
Linear Mold Shrinkage 0.0020 - 0.0040 cm/cm0.0020 - 0.0040 in/inASTM D551
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 36.0 MPa5220 psiISO 527-1
Elongation at Break 0.15 %0.15 %ISO 527-1
Tensile Modulus 12.0 GPa1740 ksiISO 527-1
Flexural Strength 68.0 MPa9860 psiISO 178
Flexural Modulus 19.0 GPa2760 ksiISO 178
Charpy Impact Unnotched 0.300 J/cm²1.43 ft-lb/in²ISO 179-1
Charpy Impact, Notched 0.100 J/cm²0.476 ft-lb/in²ISO 179-1
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.70e+16 ohm-cm1.70e+16 ohm-cmASTM D257
Surface Resistivity per Square 8.90e+15 ohm8.90e+15 ohmASTM D257
Dielectric Constant  3.7
@Frequency 1e+6 Hz
3.7
@Frequency 1e+6 Hz
ASTM D150
 4.8
@Frequency 100 Hz
4.8
@Frequency 100 Hz
ASTM D150
Dielectric Strength 35.0 kV/mm889 kV/inASTM D149
Dissipation Factor  0.0023
@Frequency 1e+6 Hz
0.0023
@Frequency 1e+6 Hz
ASTM D150
 0.022
@Frequency 100 Hz
0.022
@Frequency 100 Hz
ASTM D150
Arc Resistance 300 sec300 secASTM D495
High Voltage Arc Resistance to Ignition (HVAR) >= 300 sec>= 300 secUL-746A
Comparative Tracking Index 580 V580 VASTM D3638
Hot Wire Ignition, HWI >= 120 sec>= 120 secASTM D3874
High Voltage Arc-Tracking Rate, HVTR 0.000 mm/min0.000 in/minUL-746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 7.00 µm/m-°C
@Temperature 20.0 °C
3.89 µin/in-°F
@Temperature 68.0 °F
ISO 11359-2
CTE, linear, Transverse to Flow 6.00 µm/m-°C
@Temperature 20.0 °C
3.33 µin/in-°F
@Temperature 68.0 °F
ISO 11359-2
Specific Heat Capacity 0.900 J/g-°C0.215 BTU/lb-°FASTM E1461
Thermal Conductivity 10.0 W/m-K69.4 BTU-in/hr-ft²-°FASTM E1461
Deflection Temperature at 0.46 MPa (66 psi) 260 °C500 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 270 °C518 °FISO 75-1/-2
Flammability, UL94 V-0
@Thickness 1.00 mm
V-0
@Thickness 0.0394 in
 
Processing PropertiesMetricEnglishComments
Rear Barrel Temperature 290 - 315 °C554 - 599 °F
Middle Barrel Temperature 300 - 320 °C572 - 608 °F
Front Barrel Temperature 310 - 340 °C590 - 644 °F
Nozzle Temperature 316 - 340 °C601 - 644 °F
Melt Temperature 307 - 338 °C585 - 640 °F
Mold Temperature 117 - 135 °C243 - 275 °F
Drying Temperature 150 °C302 °F
Dry Time 6 hour6 hour
Moisture Content 0.020 %0.020 %
Dew Point -40.0 °C-40.0 °F
Injection Pressure 60.0 - 165 MPa8700 - 23900 psi
Hold Pressure 40.0 - 105 MPa5800 - 15200 psi
Back Pressure 0.200 - 0.500 MPa29.0 - 72.5 psi
Screw Speed 75 - 180 rpm75 - 180 rpm

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

Users viewing this material also viewed the following:
Celanese CoolPoly® D5110 Thermally Conductive Polyphenylene Sulfide
Celanese CoolPoly® D5112 Thermally Conductive Polyphenylene Sulfide
Celanese Coolpoly® D1202 Thermally Conductive Polypropylene
Celanese CoolPoly® E5105 Thermally Conductive Polyphenylene Sulfide
Celanese CoolPoly® E3607 Thermally Conductive Polyamide (PA6)

PCOOL12 / 29011

Free Trade Publications, Click Here!
Free Trade Publications, Click Here!

Please read our License Agreement regarding materials data and our Privacy Policy. Questions or comments about MatWeb? Please contact us at webmaster@matweb.com. We appreciate your input.

The contents of this web site, the MatWeb logo, and "MatWeb" are Copyright 1996-2024 by MatWeb, LLC. MatWeb is intended for personal, non-commercial use. The contents, results, and technical data from this site may not be reproduced either electronically, photographically or substantively without permission from MatWeb, LLC.