|
Physical Properties | Metric | English | Comments |
---|
Density | 1.56 g/cc | 0.0564 lb/in³ |
Water Absorption | 0.050 % @Time 86400 sec | 0.050 % @Time 24.0 hour |
| 0.70 % @Thickness 2.00 mm | 0.70 % @Thickness 0.0787 in |
Moisture Absorption | 0.200 % @Thickness 2.00 mm | 0.200 % @Thickness 0.0787 in |
Viscosity Number | 55 cm³/g | 0.55 dl/g |
Linear Mold Shrinkage, Flow | 0.0020 cm/cm | 0.0020 in/in |
| 0.0010 cm/cm @Treatment Temp. 80.0 °C, Time 173000 sec | 0.0010 in/in @Treatment Temp. 176 °F, Time 48.0 hour |
Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in |
| 0.0045 cm/cm @Treatment Temp. 80.0 °C, Time 173000 sec | 0.0045 in/in @Treatment Temp. 176 °F, Time 48.0 hour |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Rockwell M | 100 | 100 |
Hardness, Rockwell R | 120 | 120 |
Ball Indentation Hardness | 221 MPa | 32100 psi |
Tensile Strength at Break | 158 MPa | 22900 psi |
Elongation at Break | 2.5 % | 2.5 % |
Tensile Modulus | 11.0 GPa | 1600 ksi |
Flexural Strength | 230 MPa | 33400 psi |
Flexural Modulus | 8.95 GPa | 1300 ksi |
Compressive Strength | 230 MPa | 33400 psi |
Poissons Ratio | 0.34 | 0.34 |
Charpy Impact Unnotched | 4.50 J/cm² @Temperature -30.0 °C | 21.4 ft-lb/in² @Temperature -22.0 °F |
| 6.00 J/cm² @Temperature 23.0 °C | 28.6 ft-lb/in² @Temperature 73.4 °F |
Charpy Impact, Notched | 1.00 J/cm² @Temperature -40.0 °C | 4.76 ft-lb/in² @Temperature -40.0 °F |
| 1.10 J/cm² @Temperature -30.0 °C | 5.23 ft-lb/in² @Temperature -22.0 °F |
| 1.10 J/cm² @Temperature 23.0 °C | 5.23 ft-lb/in² @Temperature 73.4 °F |
Tensile Creep Modulus, 1 hour | 10800 MPa | 1.57e+6 psi |
Tensile Creep Modulus, 1000 hours | 8800 MPa | 1.28e+6 psi |
|
Electrical Properties | Metric | English | Comments |
---|
Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm |
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm |
Dielectric Constant | 3.8 @Frequency 1e+6 Hz | 3.8 @Frequency 1e+6 Hz |
| 4.2 @Frequency 100 Hz | 4.2 @Frequency 100 Hz |
Dielectric Strength | 32.0 kV/mm | 813 kV/in |
Dissipation Factor | 0.0070 @Frequency 1e+6 Hz | 0.0070 @Frequency 1e+6 Hz |
| 0.013 @Frequency 100 Hz | 0.013 @Frequency 100 Hz |
Comparative Tracking Index | 250 V | 250 V |
| 250 - 399 V | 250 - 399 V |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear, Parallel to Flow | 10.0 µm/m-°C | 5.56 µin/in-°F |
| 4.00 µm/m-°C @Temperature 55.0 - 160 °C | 2.22 µin/in-°F @Temperature 131 - 320 °F |
| 22.0 µm/m-°C @Temperature -40.0 - 23.0 °C | 12.2 µin/in-°F @Temperature -40.0 - 73.4 °F |
CTE, linear, Transverse to Flow | 81.0 µm/m-°C | 45.0 µin/in-°F |
| 67.0 µm/m-°C @Temperature -40.0 - 23.0 °C | 37.2 µin/in-°F @Temperature -40.0 - 73.4 °F |
| 107 µm/m-°C @Temperature 55.0 - 160 °C | 59.4 µin/in-°F @Temperature 131 - 320 °F |
Thermal Conductivity | 0.290 W/m-K | 2.01 BTU-in/hr-ft²-°F |
Melting Point | 252 °C | 486 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 245 °C | 473 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 224 °C | 435 °F |
Vicat Softening Point | 230 °C | 446 °F |
Glass Transition Temp, Tg | 90.0 °C | 194 °F |
Flammability, UL94 | HB @Thickness 0.750 mm | HB @Thickness 0.0295 in |
| HB @Thickness 1.50 mm | HB @Thickness 0.0591 in |
Flame Spread | 38.0 mm/min @Thickness 1.00 mm | 1.50 in/min @Thickness 0.0394 in |
Oxygen Index | 20 % | 20 % |
|
Processing Properties | Metric | English | Comments |
---|
Melt Temperature | 285 °C | 545 °F |
| 280 - 300 °C | 536 - 572 °F |
Mold Temperature | 130 °C | 266 °F |
| 120 - 140 °C | 248 - 284 °F |
Ejection Temperature | 170 °C | 338 °F |
Drying Temperature | 120 °C | 248 °F |
Dry Time | 4.00 - 6.00 hour | 4.00 - 6.00 hour |
Moisture Content | <= 0.020 % | <= 0.020 % |
Hold Pressure | >= 80.0 MPa | >= 11600 psi |
|
Descriptive Properties |
---|
Additives | Release agent |
Back pressure | As low as possible |
Drying Recommended | yes |
Eff. thermal diffusivity (m²/s) | 1.3E-07 |
Emission of organic compounds (µgC/g) | 16 |
FMVSS Class | B |
Fogging (mg) | 0 |
Max. screw tangential speed (m/s) | 0.2 |
Odor Class | 3 |
Part Marking Code | >PET-GF30< |
Polymer | PET-GF30 |
Processing Hold Pressure Time (s/mm) | 4 |
Resin Identification | PET-GF30 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.